Not only can you switch between hot keys, but also the extension hand switch can be installed at hand. Ctrl: Press the key + F12 key to lock the switching function (disable the hot key). Ctrl: This product can be used in games and applications that use a lot of keys. ● You can choose between the hot key "Ctrl" x 2 times" or "Scr Lock x 2 times", and it is soft to use and avoid the hot key overlaps. The KVM is a type that connects directly to the VGA port of the display, so there is no need for a display cable. In addition, the connection is a direct connection that is strong against noise and can be connected smartly. You cannot connect the display cable to models that are integrated with the display. Use with a conversion adapter, etc. This product does not require any software installation. Just connect the switcher and you can use it immediately. The keyboard and mouse are USB connected, and the mouse supports multi-function buttons and tilt wheel functions. ● Emulates the keyboard port, so you can start 2 PCs at the same time. It can also be fully booted without having to switch the port during a restart (reboot). Equipped with an auto-scan mode that automatically switches between two connected computers. This product has a silent design that does not sound when switching. ● Power supply and operate over computer USB keyboard port, no AC adapter is required. ● Share on one side and Mac on the other with one set of consoles. It can also be switched between Windows OS and Linux OS. ■ Interface (PC): Display/Mini D-sub(HD) 15-pin male x 2 keyboard/USB A connector cable x 2 mouse/USB A connector connector x 2. Interface (peripheral device side): Display/Mini D-sub(HD) 15-pin male x 1 keyboard/USB A connector female x 1 mouse/USB A connector female x 1 ■ Maximum PC connector; Switching method: Hot original key switch, Auto scan switch. Switch: Hot key switch. (Switch between PC A and B): [Ctrl][Enter] or [ScrLock] [ScrLock] [Enter] (choose either one), [Auto scan switching] [Ctrl] [A/a][Enter] or [ScrLock] [ScrLock] [A/a][Enter] (choose either one)] *Turn off auto scan mode... press [Space] key 1 time. Key lock... [C] trl] + [F12] (press again to release it); Display emulation function: None; 19 inch mounting rack installation: None; Power supply: DC + 5 V; Current consumption: 50 mA (max); Power consumption: 250 mW (max); Operating temperature / humidity: Temperature: 0 - 50 °C; Humidity: 85% or lower (condensation). Humidity: Temperature: -20 - 60 °C Humidity/Less than 90% (No condensation); Cable Length: PC 1/0.6 m, PC 2/1.2 m Console Side Display Cable/4.6 ft (1.2 m) Hand Switch Cable Length: 5.9 ft (1.8 m); Set Includes: Hand Switch, Instruction Manual (English language not guaranteed) ■Product Size: W 33.6 x D x D x H 111111.1.1.1 x H x 1.1 x 1 x 1.1 x 1 x 1 x 24 mm

From the Manufacturer

Computer Automatic Switcher with Hand Switch (2:1) SW-KVM2WVUN2

Support USB keyboard mouse, analog displaySlim cable type KVM with hand switch included.

Features

Not only can you switch between hot keys, but also the extension hand switch can be installed at hand.Press the [Ctrl] key + [F12] key to lock the switch function (disable the hot key).Ctrl: This product can be used in games and applications that use a lot of keys.You can choose between "Ctrl" x 2 times or "Scr Lock" which is soft to use and avoids hot keys overlap.No display cable is required because it connects KVM directly to the VGA port of the display.In addition, the connection is a direct connection that is strong against noise and can be connected smartly.You cannot connect the display cable to models that are integrated with the display.Use with a conversion adapter, etc.This product does not require any software installation.Just connect the switcher and you can use it immediately.The keyboard mouse is USB connected, and the mouse supports multi-function buttons and tilt wheel functions.Emulating the keyboard port allows you to start two computers at the same time.It can also be activated without having to switch the port during the restart (reboot it).It has an auto-scan mode that automatically switches between two connected computers.This product has a silent design that does not sound when switching.No AC adapter is required to supply and work over computer USB keyboard port.You can share it with one set of consoles in environments with one window and the other side MacIt can also be switched between Windows OS and Linux OS.

Share peripherals to keep your desk clean 1 pair of USB keyboard, USB mouse display, you can switch between 2 PCs.Save space around your desk	Easy switching with a handheld switch. This is a simple switching system that can be switched by simply pressing the switch on the hand.Supports hot key switching, press Ctrl x 2 times or press Scr Lock x 2 times to switch between computers.	Equipped with emulation function. Emulating the keyboard port allows you to start two computers at the same time.It can also be activated without having to switch the port during the restart (reboot it).	Works with wireless keyboard and mouse Wireless type can be used by connecting the receiver to each port. Not compatible with Bluetooth keyboards.

(more)

Can also be used as a keyboard or mouse switcher. The display can be connected directly to a computer and only a mouse or keyboard can be shared.	Equipped with a switching lock function. Press the [Ctrl] key + [F12] key to lock the switch function (disable the hot key). Ctrl: This product can be used in games and applications that use a lot of keys.	No AC adapter required Powered and works over computer USB port, no AC adapter is required.	No software installation required No software installation required, just plug and switch to use.

(more)