Feature
●[Compatible models] Corolla Cross Model: 3BA-ZSG10/6AA-ZVG11/6AA-ZVG15 Year: Year: September 2021 (Reiwa 3) September 2023 (Reiwa 5). *Not compatible with cars after October 2023 (Reiwa 5)
●1. Door lock with D shift even at speeds of 12 km/h - 18 km/h. Manual shift cars cannot be used with "door lock with D shift". Set the car speed lock
●2. When you put the shift in P after stop, the door lock can be unlocked with the engine off; Switch function is available. Manual shift car cannot be used with "unlock door with P shift". Set to unlock the engine when the engine is off. Also, when you set it to unlock it with the P shift, it will activate the engine off
●Unlock door with sudden brake 4. Answer backlight function
●Complete coupler on easy installation. Comes with connectors on both ends of the wire. To install, simply unplug the original connector under the steering wheel and connect it in between them. It does not damage the wiring of your car so it is easy to get back to the original one
Description
This is a car speed interlocking door lock kit that is compatible with the Toyota Corolla Cross. It can easily be retrofitted with an auto door lock system that is sensitive to the speed of cars often found in luxury cars. Comes with connectors on both ends of the wire. To install, simply unplug the original connector under the steering wheel and connect it in between them. It does not damage the wiring of your car so it is easy to get back to the original one. Comes with an answer function so it is easy to find your car in a parking lot.
[Compatible models]
Corolla Cross
Compatible with all grades including hybrids
3BA-ZSG10/6AA-ZVG11/6AA-ZVG15
Equipped with door lock/door lock unlock function!
Feature 1: Auto lock function.
Door locks at speeds of 12km/h - 18km/h or "D" shift.You can change the time of the door lock according to your preference.
Feature 2: Auto unlock function.
Put the shift lever into the "P" to unlock automatically. Allows passengers to get in and out of the way. Or you can switch to unlock the engine with the OFF position. If you do not want to unlock the lock until the engine is turned off.
Feature 3: Unlock door in case of emergency.
The door lock will be activated when the speed is decreased over 10.6 miles (40 km).(From 60 km/h to 20 km/h, etc.). Prepare for emergency escape The duration of the deceleration for proper operation may vary depending on the car. Please be aware that there may be cases where it will not work even during sudden brakes or collisions.
Feature 4: Answer backlight function.
When locked or unlocked, the small light will light up for about 6 seconds. Makes it easy to find your car in the parking lot. When you cant find your car even in a lock/unlock anserback, press the unlock twice, and the small light and headlight will light up for about 10 seconds! The intense appeal from the car makes it easier to find your car. The Answer back will light up even when locked or unlocked using the door handle switch. The license plate light will also light up with the small light.
Switch function settings with lever on controller box
You can change the time of the door lock or unlock by setting the switch inside of the product controller up and down.
Above the lever number 1: Door lock with a speed of about 15 km - 20 kmph
#1 Under Lever : Door Lock with D-shift
#2 on lever: unlock door with P shift
No.2 lever under lever: Unlock door with engine off
No. 5 on lever: Answer backlight function ON
No. 5 below the lever: Answer backlight function is off.
There is no function set for lever numbers 3 to 4.
Complete coupler on design! All wires come with a coupler, so there is no need to cut wires and no electrical taps are used, so you can rest assured that they will not damage your wires.
To install, simply insert the connector under the handle and the connector in the drivers side foot panel and insert the coupler.
Do your kids rush to open the door and get stuck? No more worries! Safe and safe for both drivers and passengers.
Complete coupler on easy installation
Comes with connectors on both ends of the wire. To install, simply unplug the original connector under the steering wheel and connect it in between them. It does not damage the wiring of your car so it is easy to get back to the original one.