●3-in-1 Multi-functional Water Quality Measure: Press the SHIFT button to switch between the TDS meter and EC meter. When measuring TDS or EC, you can also measure water temperature at the same time. It is very convenient and saves you money ●High Precision: A 3-in-1 water quality measuring device (TDS meter) measures EC, TDS and water temperature. Water Quality (TDS):0-999ppm, Conductivity (EC):0-9990us/cm, Temperature Test Range: 0.1°C-80.0°C Accuracy: ±2% ●Data Holder: After the measurement data is stable, press the HOLD button to secure the measurement values and take out the meter ●Automatic Temperature Compensation: Automatic temperature compensation, so it is always accurate to read at various temperatures. (℃/℉ unit switching function) ●(Impact factors) You cannot use a water temperature TDS pen to measure high temperature water. (Example: boiling water); Water flow rate can not be used with a TDS pen to measure the vibration in larger water
Description
You can use it to test the purity and temperature of your water and check if your body health or water or other water is safe and healthy, you can check if you need to replace the filter.Ideal for home and laboratories, TDS & EC tests including electroplating, boiler water, aquarium water quality inspection, pool water, photography flashing fluid, well water, deep layer water, aquatic cultivation, food processing etc.
Product Specifications:
Conductivity (EC): 0-9990us/cm
Measurement range (TDS): 0-9999ppm
Measurement temperature range: 0.1-80℃ (℃/℉ switch)
Adopts alloy probe for super sensitivity, and can measure water once in about 5 seconds. TDS:0-9999ppm, EC:0-9990us/cm, Temperature:0.1-80.0℃(Resolution) Accuracy: ±0.02Meanwhile, it can automatically compensate according to the temperature of the sample, and there are two temperature display modes, if you want to change to Fahrenheit mode, press the "SHIFT" button twice continuously to switch.
How to use:
1. After turning on the ON/OFF button, open the electrode protection cap on the bottom of the main unit.
2. Soak the bottom of the unit in the liquid that you are being measured, about 2.0 inches (5 cm).
3. Slowly stir the liquid that is measured with the main unit, press the HOLD button to lock the numeric value.
4. Every time you press the SHIFT button, the TDS and EC values will be displayed alternately.
5. After completing measurement, rinse the electrode at the bottom of the unit with clean water, turn off and return the protective cap.