Feature
●Integration: 1200W 300mL Photocatalyst Nano Disinfectant Stainless Steel Spray Nozzle, High atomization, and the fog is more even and hidden
●Usage: When the red light turns green, press the spray button below to hold the continuous spray. 3.5 fl oz (100 ml) spray time is approximately 8 minutes
●High temperature disinfectant: 170°C high temperature -180°C is a photocatalyst disinfection solution that spreads it into the car inside of your car to disinfect and purify your home
●Efficient sterilization: 360° sterilization and fully sterilized, one key switch, one key switch, one key switch, can adjust the amount of wrapping and can be used as a disinfection spray
●Note: We recommend using fully effective disinfectants, distilled water, and pure weak volatile disinfectants. Not to Use: Pure 4th ammonium salt solution, high concentration alcohol, hypochlorite acid, sodium hypochlorite, flammable, explosive, corrosive liquids, etc
[default]
Description
Specifications:
Distinct Name: Electric Spray
Voltage: 220V, 11V
Frequency: 50Hz
Power: 1200W
Nozzle diameter: 7 nozzles.
Paint Spray Capacity: 13.8 fl oz (350 ml) / S
Weight: 2.4 lbs (1.1 kg).
Package Size: 22.3x15x26.3cm / 8.70x5.85x10.26inch
Product Line:
1 x Nano disinfection
Please read carefully before buying:
Spray layer voltage is 220V, frequency is 50Hz, power is 1200W, CE
This product has a heating device and cannot be used with high temperature fabrics and flammable disinfectants.
Not flammable disinfectants. Water based disinfectant is also available, but the fog is not larger than oil.
3 Ideal for petroleum disinfectant petroleum disinfectant
4 If you have any questions, please leave us a message. We will check it as soon as you look at it.
Note:
1 Add 100ml of disinfectant and add corrosive disinfectant
2. After inserting the power cord plug into the nominal socket, press the switch key and wait for 3 seconds. When the green indicator light is on, the machine will light up after 40 seconds warm up. Can start to spray water vapor nano
3 Erroration takes about 10 minutes and switches off immediately after using the liquid to avoid machine dry burning over time.
4 Use a dry towel to remove residual moisture from the spray and complete the disinfection operation.