Feature
●Black
Description
鍵をかけることが可能なアルミ製のETC車載器用ケースです。
アンテナ別体式のETCに対応します。
ハーレー純正部品として販売されている日本無線製ETC車載器だけでなくミツバ製ETC車載器も別途スペーサーを使用することで取り付け可能です。
ケース本体をアルミ製とすることで耐久性、強度だけでなく軽量化にも成功しております。
鍵自体がケースの蓋を固定する役割も果たしているため鍵のかけ忘れは走行中の蓋の脱落につながる恐れがありました。
そのため鍵が確実にロックされていない場合は鍵を引き抜くことができな構造を採用しております。
ETCロックケースは取り付けボルトの位置や長さ、搭載するETC車載器の種類に合わせて全部で6種類ございます。
ご注文の際は必ず搭載するETC車載器のメーカー、品番をご確認下さい。「ETCロックケース 下ボルト」はケース裏面横寄り部分に長さ約22mmの取り付け用ボルトが設置されております。
ETCロックケースは専用のステーと併用することでハーレー各車種にボルトオンでの取り付けを可能としますがケース自体は汎用性の高いものです。背面の取り付けボルトをご使用いただき工夫していただくことで様々な車両への取り付けが可能です。
From the Manufacturer
Aluminum Hard Case for ETC Car Devices: ETC Lock Case
This is an ETC car device case made of aluminum that can be keyed. Compatible with ETCs of different antennas sold by Japanese radios and Mitsuba.
Retractable ETC car devices are as follows:
*Retractable ETC car unit depends on each locking case.
[Made in Japan Radio] (Compatible Lock Case: H2/EC11-N, H2/EC11-M, H2/EC11-S)
JRM-21
JRM-11
[Made by Mitsuba*] (Compatible lock case: H2/EC51-N, H2/EC51-M, H2/EC51-S)
MSC-BE51(W)
MSC-BE700 (S/E)
MSC-BE61(W)
*For storing Mitsuzaba ETC in-car equipment, the separate spacer [Model Number: G51] is required.
What makes each lock case different?
|
|
|
|
|---|---|---|
|
The end of the product number is "N" 22mm long mounting bolts are installed on the center back of the case. |
The end of the product number is "M" 15mm long mounting bolts are installed on the center back of the case. |
The end of the product number is "S" 22mm long mounting bolts are installed near the back side of the case. |
Made of lightweight aluminum alloy
The case itself is made of aluminum which is not only durable, strong but also lightweight. The key itself also serves as a secure lid to the case, so forgetting to put your keys could lead to dropping the lid while driving. Therefore, if the key is not securely locked, it will not be able to pull out the key.
Can be installed on a variety of vehicles by combining them with stays, sold separately.
|
|
|
|
|---|---|---|
Examples for Sportster Forty EightsLock case [H2/EC11-M] is combined with the stays (sold separately) [Part Number: SPM2] and installed to the Harley Davidson Forty-Eight. |
Examples for Milwaukee-Eight Softail InstallationLock case [H2/EC11-S] is combined with other stays [Part Number: SFS] and installed to Harley Davidson Breakout. *The bolt on the case is cut by approximately 5mm to avoid interference with the case bolt and oil cooler. |
Examples for Sportster IRON883Combined with lock case [H2/EC11-N] sold separately [Part Number: SPN] and installed to Harley Davidson IRON883. |
Please be sure to check the manufacturer and model number of the ETC in-car equipment when placing your order.
The ETC lock case can be mounted on various Harley-Davidson vehicles by conjunction with dedicated stays, but the case itself is versatile.
By using the mounting bolts on the back, you can attach it to a variety of vehicles.