This triple socket can be used with impact drivers and glasses ratchets, and can also be used for raceway ductors, making it ideal for rail support.
The perfect size for equipment installations, and the triple socket fits into narrow ductors.
The 0.7 inch (17 mm) socket with two sides of the W3/8 bolt nut in the raceway ductor can be tightened effortlessly.
If you install a bit of more than 4.3 inches (110 mm) or more, it can also be turned around with a bolt nut of 0.3 inches (8 mm) on the opposite side.
Because it uses a replaceable drive axis, it can be used with bits of more than 3.0 inches (75 mm) in the event of a broken axis.
Can be attached to both electric and hand tool wrenches.

Note:
When attaching to glasses ratchets, please make sure to install it in a 0.5 inch (13 mm) 12 square socket.
Please refrain from wearing it to the hexagonal socket as it may cause damage.
Do not place near fire or in high temperatures.
Please check the installation instructions and compatible tools before using this product.
If the slide is poorly moved, please lubricate it as necessary.
Please do not disassemble or modify this product as it is dangerous.
Please check for rust, deformation, and the included O-ring nitrile rubber before use.

From the Manufacturer

Equipped with a suitable size for installation and a triple socket that can fit into narrow ductors.

The raceway ductor can be attached to both electric tools and hand tool wrenches, such as impact drivers and glasses ratchets, so you can easily tighten it with a 0.7 inch (17 mm) socket with two sides of the W3/8 bolt nut in the raceway ductor, which is suitable for railway support material. The drive shaft can be used with a bit of 3.0 inches (75 mm) or larger in the case of your existing bit.

Specifications

• Socket (hexagonal) Size: 0.3, 0.7 inch (8, 13, 17 mm)
• Shaft diameter: 0.25 inch (6.35 mm) hex shaft
• Bit edge: +2, +2
• Supports 18V impact
• Body Material: Steel
• Wrench Attachment Material: Nitrile Rubber

How to switch between sockets? When the part B is pressed into the side A 0.5 inch (13 mm), when pulled out, 0.7 inch (17 mm) can be used.	How to use the slide socket? If you install a bit of more than 4.3 inches (110 mm) and turn it over, the bolt nut can also be turned on with the other side of 0.3 inches (8 mm)	How to Plug and Remove Bits While you raise the part A upward, you can insert and remove the bit, so that the bit will not fall out after inserting it.

	BS3-81013N	BS3-81317RN
Product	Triple Socket	Raceway Triple Socket
Size:	8, 10, 13mm	8, 13, 17mm
Socket Angle:	Hex	Hex

	BS2-810	BS2-1013	BSW-1721-6PN	BSW1924-6PN	BSW-1721-12PN
Product	Double socket on both ends.	Double socket on both ends.	Double Socket	Double Socket	Double Socket
Size:	8·10mm	0.4 / 0.5 inches (10	17, 21mm	19, 24mm	17, 21mm
Socket Angle:	Hex	12 Square	Hex	Hex	12 Square

	BS-1N	BS-2N
Product	Bit & Socket Set, 11 Pieces	Bit & Socket Set, 11 Pieces
PACKAGES	Bits (+1 x 65 mm, 2 x 65 mm, 2 x 110 mm, +3-6 x 65 mm), 1/4 socket adapter, 1/4 inch socket (6, 7, 8, 10, 12, 13 mm)	Bits (+2 x 65 mm, +3-6 x 65 mm, +1 x 110 mm (tiers) +2 x 110 mm (tiers) + 1/4 socket adapter, 1/4 inch socket (6, 7, 8, 10, 12, 13 mm)