Feature
●The Colour Box V2 features a new HI/LO switch that allows you to switch between clean headrooms.
●Blue EQ section features standard Treble, Middle, and Bass controls and three new Shift controls that interact with them.
●For V1 that was powered by DC18V, the V2 has changed to a standard DC9V drive without the need for special adapters, making power supply easier
●Due to changes in design by the manufacturer, the design, color, specifications, etc. may change without prior notice
●This product is a domestic distributor product (parallel import products cannot be covered by agency warranty).
Description
■COLOUR BOX V2
Colour Box V2はV1の全ての機能を継承し、さらに拡張したEQコントロール、大きくてクリーンなヘッドルームを得られるHi/Loスイッチ、コンソールから供給されるファンタム電源をXLRインプットへスルーさせる回路などの機能を新たに搭載しました。
●ヘッドルームを切り替えるHI/LOスイッチ
Colour Box V2には、クリーンなヘッドルームの広さを切り替えられるHI/LOスイッチを新たに搭載しました。LOモードではブレイクアップすることのないピュアなクリーンサウンドを簡単に得られるので、ディストーションサウンドを必要としないトーンシェイピングに最適です。HIモードでは容易に歪むので、オーバードライブ、ディストーション、ファズといった幅広いサウンドを得ることが可能です。
●EQの周波数帯を調整するSHIFTノブ
青色のEQセクションには、標準のTreble、Middle、Bassコントロールとそれらと相互作用する３つの新しいShiftコントロールを搭載しています。このノブはTreble、Middle、Bassコントロールの周波数の範囲を調整します。Shiftノブの中心周波数はTrebleが10kHz、Middleが1kHz、Bassが120Hzとなっており、Treble、Middle、Bassノブは+/- 17ｄBの間でブースト/カットをコントロールします。
●セーフティ·スルー ファンタム電源回路
Colour Box V2のアウトプットをファンタム電源が供給可能なコンソールと接続した場合、Colour Box V2のXLRインプットへ安全に送り出すためのスルー回路を搭載。電源を必要とするコンデンサマイク等にも対応します。
※ファンタム電源供給非対応の機器と接続した場合、コンデンサーマイクをはじめとする電源供給が必要な機器のご使用は頂けません。
●DC9V電源に対応
DC18V駆動だったV1に対し、V２は標準的なDC9V駆動に変更。特別なアダプターを必要とせず、電源供給が容易になりました。
こちらの商品は日本国内代理店商品となります。
並行輸入品に関しては、代理店保証を受けることが出来ませんのでお気を付け下さい。
From the Manufacturer
"Direct in Recording" Pedal
The goal is to have a Neve studio console.
This unique pedal embodies personal thoughts to replicate the sound of the direct in recording of electric guitars.Reproduces the sound from the Neve studio console that was introduced in the renowned recording studio, such as the Abbey Road Studio in London, and used for recording many works.On the path to commercialization the idea has been sublimated and transcends the concept, and is a professional studio grade preamp/EQ/Distortion pedal that is compatible with various instruments.
JHS Pedals Colour Box V2
What is JHS Pedals?
JHS Pedals is an Effector brand in Kansas City, USA.
Founder Josh Scott started this brand when he restored Boss BD-2 in his apartment.Throughout the years of tour and sessions, musicians have believed in quality as they launch JHS by learning what they need, looking for, and experienced.All JHS Pedal, JHS Mod, JHS Hand Painted are done in our South Kansas City, USA factory, from assembly to testing to shipment.
JHS Pedals Colour Box V2
Unique pedals to reproduce sound from "Direct In" recording.
JHS PEDALS COLOR BOX v2 is an effector for "Transform your equipment into the same tone as the studio console" born from the personal thoughts and ideas of JHS PEDALS representatives.Through many trial, errors, experiments, and rework work, the concept has been sublimated to a professional studio grade preamp/EQ/Distortion pedal with compatibility with a variety of instruments.
Not only for guitars, but also for electronic piano, synthesizer, vocal and drum microphone, it can be used in a wide range of situations and input sources.
[SPECS]
- Genre: Preamp/EQ/Distortion Pedal
- Red (Gain Sections): Master, Pre-Vol, Step
- Blue (EQ Sections): Treble, Midle, Bass
- Yellow (Hi-Pass Section) HI-PASS Knob HI-PASS OFF/ON Switch
- Other: HI/LO switch
- Side Switch: INST/XLR Switch, -20dB Pad Switch (Only works with XLR mode)
- Size:14.4cm L x 9.8cm W x 6.5cm H
- Power supply specification: DC9V center negative
Red Color: Gain section control
|
|
|
|
|---|---|---|
MASTERMaster Volume Control controls the volume of the entire unit. |
PRE-VOLPRE-VOL controls the amount of gain on two internal gain stages. Similar to common "Drive" and "Gain" control operations, you can get sound like grit, distortion, and fuzz by increasing gain. |
STEPSTEP controls increase the gain of each preamp stage in five stages.Turn the STEP knob from left to right increases gain in order of +18dB, +23dB, +28dB, +33dB, +39dB. |
Blue Color: EQ Section Control
Adopts a combo jack, switchable via INST/XLR switch.
The Colour Box V2 features a combo jack that supports both 1/4" phone input for instrument input and XLR input for microphone input.Switch the input terminals to match the source used with the INST/XLR switch located on the right side of the housing.
It also has a -20dB pad switch.This function only works in XLR input mode and is effective for adjusting the volume of the high output microphone
Blue Color: EQ Section Control
The blue EQ section features three new Shift controls that interact with standard Treble, Midle, and Bass controls.
Shift knobs adjust the frequency range of Treble, Midle and Bass controls.Shift knob has a center frequency of 10kHz for Treble, 1kHz for Middle, 1kHz for Basss, and Treble, Midle, Bass knobs control boost/cut between +/- 17dB.If you want to boost the high-mid frequency range, turn the Mid Shift knob above 3 oclock, and turn the Middle knob over 12 oclock.If you want to cut higher treble bandwidth, turn the Treble Shift knob over 3 oclock, and set the Treble knob under 12 oclock.Shift knob allows you to subtly control the EQ of any input signal via Colour Box V2.
Yellow: HI-PASS section and HI/LO switch
|
|
|
|
|---|---|---|
HI-PASS ON/OFF SwitchThe HI-PASS knob can be turned on and off.Switch the toggle switch upwards to activate the Hi-Pass knob. |
HI-PASS KnobActivated by the switch on.Change 6dB per octave between 60-800Hz |
HI/LO SwitchThe Colour Box V2 is equipped with a HI/LO switch that allows you to switch between clean headrooms.In LO mode, you can easily get pure, clean sound without breaking up, so you can get toned shaping without distortion sound.In HI mode, distortion is easy to obtain a wide range of sounds, such as overdriving, distortion, and fuzz |
