Feature

●Transmit measurement: S21 supports 70dB) 50KHz‑1.5GHz, 60dB) 1.5GHz-3GHz. ‑50dB) 50KHz‑1.5GHz) and ‑40dB) 1.5GHz‑3GHz. The antenna analyzer supports 1.005) 50KHz‑1.5GHz, 1.02) 1.5GHz‑3GHz. Flip the display for easy use
●For a variety of software: The device can be controlled from PC via VNA-QT software, Linux, )7+), and supports OSX plan. It also supports VNA-Saver, extracts the data displayed on your computer and stores it in your Touchstore file
●Multifunction: Not only can you test the antennas constant wave impedance, but also debugging the duplexer, filter insertion loss, test cable separation and attenuation, shortening the antenna amplifier coefficient, phase and amplification
●RE-Calibration or RECALMATION during frequency changes: SAA‑2N / VNA_V2.2 uses the same user interface as the VNA, but it uses different technology architectures, do not load initial calibration data at startup, and do not insert the calibration data automatically after the user changes frequency data. Every time you turn on the power and change the frequency, you need to re-calibrate or recall
●Meets Original Technical Specifications: 3GHz vector network analyzers are designed with OwOComm. In accordance with the LGPL license agreement, which is manufactured fully compliant with the v2_2 file released by OwOComms development department, move to the following passes to update firmware update:github vna‑v2, VNA2‑Firmware, Release


Description

Specifications:
Item Type: Vector Analyzer
Frequency Range: 50 kHz - 3 GHz
System Dynamic Range) Calibration: 70dB) up to 1.5GHz, 60dB) up to 3GHz)
S11 noise floor) pre-calibrated : -50dB) maximum 1.5GHz), -40dB) up to 3GHz.
Frequency Sweep: 100 points per second.
Display: 4 inches, 320 x 480
USB Interface: Micro USB
Power supply: USB, maximum charging current 1A
Battery: 3,000 mAh Li-ion
Battery Connector: JST-XH 2.54mm
Maximum scan point) on device: 201
Maximum number of scanning points) USB: 1024
Port 2 return loss) 1.5GHz: 20dB typ
Port 2 return loss) 3 GHz: 13 dB min
VNA-QT Software Support Platform: for Linux, for 7+), for OSX Plan

Package List:
1 x SAA-2N Host
2 x Type N Male to Male RG142 to PURRF Cable
1 x Micro USB cable
1 x Touch Screen Pick and Strap
1 x Type N Male Calibration Kit - OPEN
1 x Type N Male Calibration Kit - LOAD
1 x Type N Male Calibration Kit - SHOR