Feature

●Filter Size: Outer Diameter: 4.0 inches (102 mm), Height: 5.9 inches (149 mm), Thread Diameter: M26 P1.5 [Caution] Please check the compatibility chart (picture) before purchasing. This oil filter wrench may not fit any other oil filter
●Wrench Size: 4.0 inches (102 mm); Material: Polished steel plate 0.08 inch (2 mm); Chrome plating; Features: Puller function (bolt included and used when the filter stays in place). Easily loosens through tight locking oil filters
●[Filter Compatible Part Number] Pitwork (NISSAN): AY100-MT028 Denso: MI-01 TOYO: TO-4256M NITTO: 4F-122 EXCEL: UO-5007 Micro: T7327 PMMC: PO-3510 VIC: C-313 Alps: AO-935 Uni ON: C-35 1 Peacock: PE-268 Emuka: MO-39-1 Genuine Mitsubishi ME013343 ME013307 ME202472 ME215002 ME227821 ME229416 MX938500 1230A046 1236 0A154
●Set Contents: Oil filter x 2, filter wrench x 1
●Compatible models: [Mitsubishi] Canter FB FD FE FG Fighter FK Pajero Challenger Diesel Rosa Microbus

[[5 filters 1 wrench set] OJ310]




[[5 filters 1 wrench set] OJ311]




[[Set of 10] Oil Filter Part No. OJ311]




[[Set of 5] Oil Filter Part No. OJ311]




[[2 filters 1 wrench set] OJ310]




[[Set of 5] Oil Filter Part No. OJ310]




[[2 filters 1 wrench set] OJ311]




[[Set of 2] Oil Filter Part No. OJ311]




[[Set of 2] Oil filter part number OJ310]




[[3 filters 1 wrench set] OJ311]




[[3 filters 1 wrench set] OJ310]




[[Set of 3] Oil filter part number OJ311]




[[Set of 3] Oil filter part number OJ310]





Description

MAHLE is the original brand of the worlds NO.1 filter manufacturer to supply genuine filters.

MAHLE is the worlds largest genuine supplier.
We have a global production site, and have contributed to the automotive industry for about 100 years with a wide range of products.
MAHLE has the worlds best genuine supply, and is supported by all products with the same quality as genuine products.

The highest quality oil filter (oil elements)
Engine Surveillance
Mahle oil filters not only ensure contaminants are contaminated into the lubrication system, but also maintain the efficiency and performance of the oil grade and engine.
The filters stable pleated shape ensures stability during cold start, and the peak load of up to 20 bar is offset by the high pressure resistance of the housing.
Pressure relief valve can be used for cold starts, viscosity oil at low temperatures, extreme soiled filter elements or when replacement time has been past
Guaranteed oil supply in all conditions, no return flow valve stops filter emissions when engine is off and provides proper oil supply when engine is started.
Additionally, high-grade sealant and custom fit connecting pieces ensure that they separate dirty and filtered oils.

Cartridge Type Oil Filter
The OX and OX-Eco Program (part number OX) filter cartridges are an economical solution and not a complete filter,
It can only replace dirty filter elements.
Environmentally friendly solution helps reduce material and waste costs.

The OX-Eco version cartridges contain no metal so they can fully incinerate. The oil filter cartridge is approx.
Designed for all oil filters with removable housing.

In addition, a special spin-on filter and filter cartridge are available for working oil.
Please note that the air filter must be replaced within service intervals set by the vehicle manufacturer to ensure maximum performance.

[Caution for full power oil filter wrench]
Griffin oil filter wrenches are manufactured for genuine oil filters and may not be used if they are not genuine parts.
Be sure to stop the engine before wearing gloves before working. (Please pay special attention when the engine is high temperature.)
◇ Be careful not to overtighten the oil filter when installing it. (Please add a small amount of engine oil to the gasket.)
This products full power and oil filter may not slide off, but please do not hit the hex nut with a hammer.
(If this product has a puller function, please tighten it to the left and right cross with the included bolts.)
Please do not use for purposes other than removing oil filters.