[US]
How to use:
1. Extract : Long press the printers power up button, the printer will start working, and the power amplifier will turn on (green). Turn off: turn off the power button for 2 seconds, the printer will turn off and all indicators will turn off. Perform self-testing every time to get printer status.
2. Self-testing method: When power-on, press the power and feed button at the same time, the "WOICE", the user can get power and BTID status from the self-test page.
3. BT Connection: Open the printer first, close the BT in Android or IOS search, then choose the correct connection.
4.Connect the driver to PC via USB, users can work on PC after installing the driver.
Specifications:
Item Type: Thermal Printer
Model: D58A-2
BT Version: 4.0
Interface: Micro USB
Printing method: thermal printing
Printing speed: 2.0 - 3.1 inches (50 - 80 mm) / s
Distance: 8 dots/mm, 384 dots/line
Print Width: Approx. 48mm/1.9"
Paper Width: 57.5±0.5mn
Volume outer diameter: approx. 40mm / 1.6in
Cascade inner diameter: approx. 13mm/0.5"
Paper thickness: 60-80um
Life cycle time: 50 km (printing density is less than 12.5%)
Input Voltage Current: AC 100 - 240 V - 0.2 A 50 / 60 Hz
Output voltage current: DC 5V/1000mA
Battery Type: Rechargeable lithium battery (built-in)
Battery Capacity: 1500mAh
Package List:
1 x Thermal Printer
1 x Data Cable
1 x Plug
1 x User Manual
Note:
1. If the printer is not used for a long time, you need to remove the battery. Otherwise, the battery and printer will be damaged.
2. Select a large amount of paper. Do not store thermal paper in high temperature sunlight
3. Shipped with built-in battery.