【特徴】エンボシングでラベルを作成するダイモテープライターです。文字盤を交換することで、アルファベット(大文字のみ)、数字、記号の打ち分けが可能。
【打刻方法】1テープをカートリッジが直角になった部分から、4cmほど引きだし、本体グリップのケースを開けて、テープ挿入口から差し込みます。
2本体蓋を閉めて、本体右側面についている、フィードノブを前方に向かって回し、テープを送ります。
3本体前面からテープが出てきたことを確認します。
4テープを本体前面まで進めたら、文字盤を回して1文字ずつ打刻していきます。
5打刻が終わったら、最後の文字の後端をフィードノブで、本体前面小窓まで進めます。
6テープを前面から出したら、本体裏面にあるカッターを握りこみ、テープをカットします。
テープカットしたテープ後端は、ミシン目が入って剥がしやすい形になります。
*カッターを強く握ったまま、テープをひっぱらないでください。
カッターを握った状態のままテープを引っ張ると、ミシン目からテープが千切れて本体内に破片が残ってしまうことがあり、つまりの原因となります。
カット部分で握って離せば、すでにテープはカットされております。
【テープのセット方法】テープを本体にセットした状態で、無駄なテープをカートリッジに巻き取ります。
【文字盤、交換方法】文字盤の右側を押して文字盤を取り外します。
差し替えたい文字盤を左側から差し込みます。
【付属品】文字盤4枚、9mmテープ1巻。
エンボスで味のあるラベルが作成できるダイモテープライター。白く文字が浮かび上がって、だれでも手軽にオリジナルラベルが作成できます。
ご家庭で使っている衣装ケースや靴箱、調味料入れ、各種ボトルなどに使っていただけます。
また、その味のあるフォントを活かして、スクラップブッキングでのメッセージ付けなどにも役立てて頂けます。
また、耐久性のあるビニールテープにエンボスで文字を浮かび上がらせる特徴上、水に触れるところや、直射日光にさらされる場所でも使い続けることが可能。水道やガスのメーターなどの管理にもお使いいただけます。
前述の内容から、ご家庭だけでなくオフィスや、様々な現場でお使いいただけます。ぜひ、あなたの生活の中でダイモを取り入れてみてください。
Dimo Tape Lighter was born in 1957 in California, USA.This is a tape lighter that allows you to create cute labels by applying pressure on the plastic tape.
In addition to the durability of the tape and good readability of the letter, it has gained popularity with its beloved typework, and has been used worldwide until now.Why not try using the Dimo that blends in with your everyday routine?
Dimo Tape Lighter was born in 1957 in California, USA.This is a tape lighter that allows you to create cute labels by applying pressure on the plastic tape.
In addition to the durability of the tape and good readability of the letter, it has gained popularity with its beloved typework, and has been used worldwide until now.Why not try using the Dimo that blends in with your everyday routine?
blue
grey
The slits on the inside of the main unit are compatible with 0.5 inch (12 mm) wide, 0.3 inch (9 mm) wide, and 0.2 inch (6 mm) wide tapes.
Pull the tape out a little bit from the cartridge beforehand.Open the lid part of the main unit and insert the tape into the slit of the main unit.
Once the lid is closed, turn the dial on the left side of the main unit counterclockwise.Tape is sent forward with a clickWhen the tape comes out from the front of the body, its ready to stamp.
Press the right side of the dial to change the dial.The dial is removable.Insert the dial you want to replace from the left side of the main unit and you are ready to replace.
Turn the dial around to match the words you want to hit.
After you make the letters, squeeze the body grip tightly and release.You will receive a single letter of tape so you can see the letters you have hitten.
We continue to engrave each letter by letter in a row.
Perforations at the end of the hammeringRemove from perforation for better use
When you finish the letter, turn the feed knob to send the tape to make sure you have hit it right all the way to the end of the letter.
Just squeeze the cut part on the back of the body and release the tape is already cut.Perforations are sewn into the cut portion, so please peel it off and label it anywhere you like.
|
|
|
---|---|---|
In the kitchenUnlike paper labels that are printed with no ink smell or smell.Also, since it is not a piece of paper, it will not get med.Easy to create labels with excellent visibility and uniform appearance. |
In the bathroomEmbossed (bump) imprint for durability against water, dirt, and smudges and the display wont fade away from smudges or abrasions. |
For storageDigital has become mainstream and the analog feel is somewhat nostalgic dimo tape.Just stick it on and youll love it. |