Feature

●Dimo tape lighter for easy fun with embossed labels
●It can be used not only for daily labeling, but also for gift wrapping, message cards and many other occasions
●Fixed dial. Compatible with 9mm tape Tape is stored inside the grip of the body
●Engravable Characters: A-Z (capital), 1-9, 0
●Engravable Characters: Symbols (,,, ! , #, $, .(dot), , (comma), -, /, @)

[Label lighter + tape]




[Single Item]





Description

(Dimo tape lighter with embossed processing)
Features a fixed dial and large grip. The grip can be used to strike solid fonts.

(Hitting Method)
1:Pull the tape about 4cm from the right angle of the cartridge. Open the grip and insert through the tape insert.
2: Knock the dial along the space mark, repeat the empty knock until the tape is winded.
3:Knock the tape according to the space and move the tape to the starting line.
4: Proceed the tape to the starting line and start stamping. Turn the dial to align the markings on the dial and engrave each letter at a time.
5: Press half the last letter to start line when you finish hitting.
6: After sending the tape to the starting line, hold the dial firmly along with the scissors mark, cut the tape.
The tape cut is perforated for easy removal.

Do not pull the tape while holding it firmly with the scissors mark.
When you grip the grip with the scissors mark, the cutter will remain in the tape and the tape can be cut easily within the main unit, causing a fault.
Squeeze the cut and release the tape is cut.


When the tape is set on the main unit, weigh the excess tape around the cartridge.
Store the tape inside the grip as is.

Note:
Slowly turn the dial when turning the dial. If you turn it too much, the dial may slide off and cause it to malfunction.

When cutting the tape, do not pull the tape while holding it with scissors marks.
Tape is perforated at the back for easy removal.
If you pull the tape while holding it firmly with the scissors mark, the perforation will break down and cause clogging.
Squeeze with scissors mark and release tape is cut. Ready to use.

Accessories: 1 roll of 0.4 inch (9 mm) tape.

Embossing dimo tape lighter for flavored labels. The white lettering makes it easy for anyone to create their own labels.
It can be used in a variety of bottles such as costume cases, shoe boxes, condiment boxes, shampoo, etc.
You can also use the flavored font to make messages on scrapbooking.
It also features embossed lettering on durable vinyl tape so you can continue to use it in areas exposed to water or direct sunlight.
It can also be used to control water and gas meters.

With the above mentioned content, it can be used in a variety of places as well as in the office. We hope you can incorporate the Daimo in your life.

Product Name: Daimo Label Writer Organizer Express 9mm Tape Compatible DM12965



From the Manufacturer