Function:
1 The left side of the effect has an XLR DI output interface, 3.5mm auxiliary audio interface, 3.5mm headphone monitor output interface. 6.35mm mono input interface, 6.35mm output interface, 6.35mm dry signal output interface.
2. You can choose the DI (XLR DI output interface on the left). Output signal requires an untreated dry signal (front) or wet signal (rear) treated by this effector. Use Boost/GND switch to select ground control to eliminate ground ring noise.
3 In the control panel, you can choose to close the box simulation function of the DI output interface (left XLR output interface) and the 3.5mm headphone output interface with the DI Wave switch.
4 The output shift switch is used to choose whether to close the box simulation function of the output interface (rear output interface) or not.
5 Drive step pins allow you to activate or inactivate overload functions. Long press this key to activate or inactivate the noise gate function