Feature

●Thickness = 5mm x Length = 10mm
●Thread part = Full thread coarse [Pitch: Approx. 0.03 in (0.8 mm))
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M10×35]

Description

■ Head shape: Button cap
Rounded head with hex hole is lower and wider than regular cap bolts. In addition, the button cap may have a slightly different head height (JIS, SS), so please check the diagram/standard chart.
Hex wrench is used for tightening, so you can apply strong torque to tighten.

■ Thread Shape: Coarse [Full screw]
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
In addition, the "full screw" is the shape of all the threads from the tip of the head to the head seat.

■Material: SUS316L
SUS316 ultra low carbon steel and austenitic stainless steel with enhanced grain corrosion resistance than SUS316. It is used in saltwater and other areas where corrosion resistance and puncture resistance are required.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.