Feature

●【PERFECT FIT】SmallRig full cage & handle kit KCCS2694 is designed for Sony A7III and Sony A7RIII and does not interfere with camera buttons, etc. M2.5 screw on the right side and 1/4"-20 screw on the bottom to secure the cage and camera to prevent twisting. In addition, it has a rubber pad to prevent damage to your camera
●【Handle Kit】The top handle is made of aluminum and wood and can be attached to the top of the cage. The handle reduces fatigue and provides a better shooting experience. You can also mount the SmallRig Monitor Holder 2904 and Mic 3288 to the handle via the 1/4" screw hole and cold shoe mount
●【Multiple Mounting Points】SmallRig full cage KCCS2694 is equipped with multiple mounting points such as 1/4" and 3/8" screw holes, cold shoes, positioning holes for ARRI, and can be combined with more accessories such as SmallRig side handle 2093, Monitor Cold Shoe Mount BSE2346, RGB Camera Light 3157, Monitor Mount 2903
●【Considerate Design】It has a strap slot to attach a wrist strap or neck strap that is sold separately. In addition, the magnetic suction design has a built-in driver so you dont have to worry about losing it. Easy to install anytime
●Note: Although we strive to accurately represent the color of the product, actual color may vary slightly due to lighting and equipment used. Also, before attaching your camera to the cage, please remove the triangular loop on the left first, and store it firmly


Description

SmallRig 2694 Cage Kit for A7 III and A7R III

Key Features:
Adopts new color (dark olive) to make it more unique.
The cage uses a 2-point closure design for high stability.
You can attach a variety of external accessories and expand your possibilities.
◆Ergonomic handle makes it more convenient to carry your camera or take low-angle shots
The driver tool on the bottom of the cage makes it more convenient to put on and take off the cage.
SmallRig A7 III A7R III Cage Kit 2694 is designed for the convenience of filming videos.
The cage uses a 1/4" screw (bottom) and M2.5 screw (top left) to secure the camera to ensure stability and less rattle during use.
The cage is molded from the camera so it will not interfere with the cameras buttons, input, or battery compartment.

Cages and handles have 1/4" screw hole, 3/8" screw hole, ARRI accessory mount, cold shoe etc.
You can attach an external microphone, monitor mount 2346, ARRI accessory mount compatible side handle 2642, cable clamp 1679, and more to expand your shooting possibilities.
The top handle is made of ergonomics and wood material, so it is very comfortable to hold and carry your camera and take low angle shots.
It is easy to store and carry the driver tools (flathead screwdriver & hex wrench) attached to the bottom of the cage, very convenient for removing and removing your camera from the cage.

Note:
1. The color of the posted picture may differ slightly from the actual product due to lighting conditions at the time of shooting. Please acknowledge
②Cage Installation Instructions:
Please remove the triangle ring on the left side of the camera first, and store it in order to avoid loss. Next, put the camera into the cage, tighten the 1/4" screw at the bottom of the cage.
Finally, remove the M2.5 screw from the top left of the cage and use the triangular ring hole to secure the camera to the cage.

Compatibility:
A7 III/A7R III
You should receive:
1 x Cage.
1 x ARRI accessory mount compatible top handle.

Product Specifications:
Product Dimensions: 143.6 x 173.8 x 136.4mm
Package Dimensions: 6.5 x 6.1 x 3.3 inches (165 x 155 x
Product Weight: 410g
Packing Weight: 485g
Material: Aluminum alloy (anodized treated), wood