■□■Parking monitoring mode is added to the digital inner mirror with recording function. ■□■

- Detects impact while parked and begins recording
This product is connected to a digital inner mirror with a corresponding recording function to monitor impact while parking. When an impact is detected, the front and back recording function is performed to record 1 minute, with the built-in digital inner mirror.
Recording starts after impact is detected. No constant recording.

- Turn off cancel timer function
After 3 minutes of vehicle key switch off, it will not detect impact when you get off the vehicle, and it will not detect shocks.

■ Impact detection notification function
If an impact is detected while parking, the threatening LED (blue) flashing pattern and buzzer sounds will notify.

■ Equipped with G-sensor.
The G-sensor on the main unit detects impact to the vehicle and starts to supply power to the digital inner mirror.

■ 2 levels of sensitivity settings
You can choose between [Hi(Sensitive)/Lo (Normal)] during parking surveillance.

- Battery voltage monitoring function.
Monitor the voltage of the vehicle battery and stop the power supply to prevent battery from going out.

- Parking monitoring mode pass function.
You can temporarily turn off the parking monitoring mode during mechanical parking lots, and locations with frequent vibrations.

- Intimidating LED
Equipped with a threatening LED on the tip of the main unit. When parking surveillance mode is activated, the LED flashes blue to prevent light threatening and car theft

From the Manufacturer

Parking monitoring unit for digital inner mirror with recording function.

By connecting this product to a car equipped with a digital inner mirror with recording function, you can record while parked with a car that normally couldnt record recording.

When this product detects impacts, it can record video using the front and rear recording function with built-in digital inner mirror with recording function.

Recording starts after impact is detected.It does not allow constant recording while parking.

Detects impact while parked and begins recording

This product is connected to a digital inner mirror with a corresponding recording function to monitor impact while parking.When an impact is detected by the G-sensor built in this product, it will power the digital inner mirror, and it will record for 1 minute with the original front and rear recording function.

Recording starts after impact is detected.No constant recording.

The impact detection sensitivity can be selected from "Hi" (sensitivity) and "Lo (normal).

Parking surveillance and impact notification function.

If an impact is detected while parking, the threatening LED (blue) flashing pattern and buzzer sounds will notify.

The menacing LED (blue) flashes from one flash to twice.When the ignition of the vehicle key switch is turned on, it will make a "pippipip" and buzzer sound twice to remind you that there was an impact while parking.

If the ignition is turned on within 3 minutes after the impact is detected, it will not cause a buzzer sound if you ride it.

(more)

Battery voltage monitoring function.

Monitor the voltage of the vehicle battery to prevent battery from rising, and stop the power supply to the digital inner mirror when the vehicle battery voltage is below 12.2V.

(more)

Intimidating LED

Equipped with a blue menacing LED on the tip of the main unit.When parking surveillance mode is activated, the LED flashes to provide light threatening to prevent car awareness and vehicle theft.

(more)