MMB 48mm Speedometer
German mechanical speedometer.
Small 48mm diameter standard dial.
Meter cable mounting screw diameter is 0.5 inch (12 mm) type.
If you currently use a 5/8 or 16mm cable, you will need to change the cable.
They fit perfectly from full custom vehicles to light custom vehicles.
Unlike the common cheap Asian meters, the speed is similar to the actual measurement.
You can choose between 1:1 and 2:1 meters.
Please select according to the vehicle installed.
■ 1:1
[19-103]
1:1
Cable is out of the transmission
1968-79 FL Model
1971-72 FX
1980-83 FXWG
Mechanical speedometer »Basic« by MMB, chrome-plated, Ø 48 mm, thread: M12 x 1.0, dial: black, drive ratio: 1:1, →180 km/h, illumination colour: white, Germany, gross weight: 170 g
As small as possible. The housings of these extra-mini mechanical speedos have a diameter of only 48 mm. They are need a cable drive off the transmission or front wheel.
■ 2:1/2240:60
[19-105]
2:1
Cable is out of the transmission
1936-67 FL/EL Model
1936-67 WL/G Model
Cable is out of the front wheel
1973-95 FX/XL Models
1980-84 FL Model
1984-95 Softail Models
(Above is 2240:60, but it can be installed with a 2:1 ratio. )
Mechanical speedometer »Basic« by MMB, chrome-plated, Ø 48 mm, thread: M12 x 1.0, dial: black, drive ratio: 2:1 / 2240:60, →180 km/h, illumination colour: white, Germany, gross weight: 190 g
As small as possible. The housings of these extra-mini mechanical speedos have a diameter of only 48 mm. They are need a cable drive off the transmission or front wheel.
When installing, be sure to check whether the meter cable pops out within 0.6 inch (15 mm) of the specified number of the manufacturer.
We cannot accept complaints of meter damage due to bad installation.
If cable processing is required, please be sure to install it at a custom shop or other professional shop.