Single chip USB to UART (RS232, RS422, or RS485)
USB to FIFO
USB to FT1248
USB to JTAG
USB to SPI
USB to I2C
USB to bitvan
USB to high speed serial interface
USB to CPU target interface (as memory)
CJMCU-FT232H is a single channel USB 2.0 high speed (480Mb / s) to UART / FIFOIC. Features consist of a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:
Single channel USB to serial/parallel ports in various configurations.
Entire USB protocol to be processed on chip No USB specific firmware programming required.
Compatible with USB 2.0 high speed (480Mbit/sec) and full speed (12Mbit/sec)
Multi-protocol synchronous serial engine (MPSSE) (USB to JTAG, I2C, SPI (MASTER) or bitban) design simplifies synchronous serial protocol.
UART transfer data rate up to 12Mbaud (RS232 data rate is limited by external level shifter)
USB to asynchronous 245FIFO mode for transfer data rate up to 8Mbytes/sec.
USB to sync 245 Parallel FIFO mode for up to 40 Mbytes per second transfer
Supports proprietary half-duplex FT1248 interface with bi-directional data bus (1, 2, 4, or 8-bit widths) with configurable widths.
CPU style FIFO interface mode simplifies the design of the CPU interface
High speed serial interface option
FTDI royalty free VirtualCom Port (VCP) and Direct (D2XX) drivers virtually eliminate the need for USB driver development.
Adjustable Receive Buffer Timeout
Size: 3.7 * 1.6cm / 1.46 * 0.63in
Package Includes:
1 x Module