Feature
●Brand : モバイクス(Movaics)
●Compatible Devices : タブレット
●Mounting Type : ダッシュボード
●Vehicle Service Type : 自動車, オートバイ
●Model Name : MOBIKS 41 Car Mount Stand
●Item Weight : 230 Grams
●[Car Navigation Stand, Gel Suction Type, Ultra Long Arm (For Dashboard) Universal Type]
●This is a universal gel suction cup type ultra long arm (for dashboards) car navigation mounting stand that can be used for devices up to 3.1 inches (80 mm) - 6.1 inches (25 mm) or less
●For portable navigation systems, it usually fits 5" to 7" or less (check dimensions)
●[Features] The arm is very long, so it is ideal if you want to install it at a low position. The gel vacuum suction cup and gel material can be attached directly to the dashboard. The suction cup becomes vacuum and can be firmly fixed on dashboards with soft skins. The suction cup type makes it easy to install and replace. The arm angle can be adjusted in 3 locations, so you can fine-tune the installation height and angle. Water wash to restore the suction power. When the suction cup becomes weak, the adhesive strength will be restored by washing it with water. Any dirt that has been attached can be washed off with water. Rub the fingerprint part of your hand until it becomes smooth. Suction cup size: Diameter approx. 3.1 inches (80 mm)
●[Accessories] Stand: Gel suction cup with extra-long arm type; Suction cup base for mounting on the stand
Description
商品紹介
Compatible models: Devices up to about 3.1 - 6.1 inches (80 - 155 mm) / thickness under 1.0 inches (25 mm)
For portable navigation systems, it usually fits 5" to 7" or less (check dimensions)
Please check the dimensions of the device you use.
Since it is for commercial use, the outer box and instruction manual are not included. Some stands have a simple instruction manual (English language not guaranteed).
Part of the image is made of hamekomi synthetic, and navigation is for Panasonic and Gorilla compatible A.
Specifications may change without prior notice.
ご注意（免責）＞必ずお読みください
掲載の寸法図や各部の動き、取付イメージはパナソニック ゴリラ 適合A用です。ホルダー部分の寸法や接続部の違い等により、寸法や位置などは実際とは異なります。
From the Manufacturer
Gel Suction Cup Type Extra Long Arm
Description
[Car Navigation Stand, Gel Suction Type, Ultra Long Arm (For Dashboard), Universal Type]
This is a universal gel suction cup type ultra long arm (for dashboards) car navigation mounting stand that can be used for devices up to 3.1 inches (80 mm) - 6.1 inches (25 mm) or less. For portable navigation systems, it usually fits 5" to 7" or less (check dimensions)
Features
The arm is very long, so it is suitable for use when you want to install it at a low position.
The gel vacuum suction cup is made of gel material, so it can be attached directly to the dashboard. The suction cup becomes vacuum and can be firmly fixed on dashboards with soft skins. It is also a suction cup type, so you can easily change it and replace it with 3 arm angles + ball joints, so you can finely adjust the height and angle of the installation by washing it with water to restore the adhesive strength when the suction cup becomes weakens, the adhesive strength will be restored. Any dirt that has been attached can be washed off with water. Rub on the fingerprint part of your hand until it becomes smooth.Suction cup size: Diameter approx. 3.1 inches (80
Accessories
Stand: Gel Suction Cup, Ultra Long Arm Type, Stand Mounting, Suction Cup Base; Compatible Models: 3.1 - 6.1 inches (80 - 155 mm) / Thickness Less than 1.0 inches (25 mm); For portable navigation systems, it can be used for navigation that is usually 5 inches to 7 inches (please check dimensions).
