Feature

●- Universal Heated Bed Power Extension Module High Power Module for 3D Printers
●- Can be used with Chitude motherboards and other open 3D printer motherboards
●- Helps you get more powerful with 3D printer (up to 15A) with controller board
●- With this additional module, the maximum current on the board can reach 25A
●This is a premium company that provides customer service. And you can reply your email in the fastest time


Description

This is a premium company that provides customer service. And you can reply your email in the fastest time.
Description:

This module is based on the Power MOSFET and allows PID control of heated beds (DC-DC relay normally does not permit this).

At least 20A (20X12 = 240W) means that your total power usage is 240W, if you use 12V power supply.

The controller board can only be set to 15A, so this setting will not work. You will need this extra power module to work it.

Normally, under cooling conditions, the module will find stable operation at I(Max) = 25A, current use must not exceed 25A.

This module is recommended if you use a bed with a 3D printer using a 12V power supply.

Specifications:

1. Color: Black

2. Maximum current: 25A (enhanced heat dissipation)

3. Size: Approx. 2.4 x 2.0 x 1.2 inches (6 x 5 x

4. Mounting hole: 3.2mm diameter for M3 screws

Package includes:

Cable and 2 set heated bed power module