Feature

●Thickness = #10 (approx. 4.7mm) x Length = 5/8" (approx. 15.9mm)
●Thread Part = Full Thread Uni-fi Fine (UNF) [Pitch: Approx. 0.03 inches (0.79 mm]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[#2-64×1 & 4]

Description

■ Head Shape: Cap
Barrel head with hexagonal hole
Hex wrench is used for tightening, so you can apply strong torque to tighten.

■ Thread Shape: Unifi Fine (UNF) [Full Thread]
Uni-fi is a standard that originates in the USA. Currently it is prescribed by ISO (International Organization for Standardization) to unify standards, Canada, and Britain. "UNF" is finer than the standard pitch of the Unifi standard.
In addition, the "full screw" is the shape of all the threads from the tip of the head to the head seat.

■Material: Stainless steel
Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.

Full and half threads may fluctuate
Uni-fi standard (UNC/UNF) and wit bolts are imported, so even with the same size, there is a possibility of "full screw" and "half screw" fluctuations between purchases.
If the "full screw" and "half screws" are different, we will contact you in advance. Thank you for your understanding.