Feature

●Thickness = 6mm x Length = 18mm
●Thread part = Full thread coarse [Pitch: Approx. 0.04 inch (1.0 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M3×6]

Description

■ Head shape: Low head cap
Barrel head with hex hole for low head height
Depending on the height of the head, it can be called "Low Head", "Ultra Low Head", and "Ultra Low Head", and the lowest is "Ultra Low Head".
Hex wrench is used for tightening, so you can apply strong torque to tighten.

■ Thread Shape: Coarse [Full screw]
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
In addition, the "full screw" is the shape of all the threads from the tip of the head to the head seat.

■Material: Iron (SCM435)
It is called chrommolybdenum steel alloy for mechanical structures, and is an alloy steel with good hardening properties.
Contains Cr (chromium) for better corrosion resistance than "iron".
Stronger than "iron" or "S45C".

■Surface treatment: Iron oxide coating
"Black Dye" is a chemical treatment that forms an iron tetrioxide coating. The rust resistance is as "better than fabric" and does not rust easily.
Color is "Black".