Feature
●Thickness = 8mm x Length = 60mm
●Thread part = Half thread coarse [Pitch: Approx. 0.05 inch (1.25 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items
[M8×35]
[M5×40]
Description
■ Head shape: Low head cap
Barrel head with hex hole for low head height
Depending on the height of the head, it can be called "Low Head", "Ultra Low Head", and "Ultra Low Head", and the lowest is "Ultra Low Head".
Hex wrench is used for tightening, so you can apply strong torque to tighten.
■ Thread Shape: Coarse [Half thread]
It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
In addition, "half-thread" means that the screw is only cut from the end to the end. The length of the threaded part may vary depending on the manufacturer, size, etc.
■Material: Stainless steel
Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.
■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.
Product Features:
Low head cap (low head cap)
These bolts are imported so there is a possibility of "full screw" / "half screw" fluctuations between each purchase and shipping.
If "full screw" / "half thread" is important, please inquire in advance.
Please note that if the "full screw" or "half screw" differs from the order product, the customer will contact you.