Specifications:
Material: Cast steel
Rated Voltage: 220V-/50hz
Plug: CN standard plug
Inlet Connection Thread: G1/4"
Power consumption: 150 W
Extreme Pressure: 2pa
Extraction Rate: 3.6m³/h
Tube length: about 0.9m/35.43"
Weight: Approx. 16.9 oz (4804
Package included:
1 x Vacuum Pump with Cable
1 x Pressure Gauge
2 x Tubes
Instructions:
When using the vacuum pump, remove the inlet cap first, and connect the suction container. Pipe needs to be shortened.
Next, make sure the inlet connection is tight, the pipe is sealed and reliable and leakproof.
Remove the exhaust cap from the catcher, turn on the power switch and the pump will start to work.
After using the pump, close the valve between the pump and the suction container, close the power switch on the pump, and unplug the power plug.
Removes connected pipes
Finally, cover the intake cap and vent cap to keep airborne particles out of the pump chamber.
Note: If you need an adapter, please kindly note.