[905x330x215mm (set of 2)]
[905x305x215mm (set of 2)]
Compatible with all tire widths, safety and ease of use, ramp dimensions: 35.8 x 12.0 x 8.5 inches (905 x 305 x 215 mm) (1 piece), 2 pieces/box.
Designed to help raise the car 170mm to allow it to be put under the car during maintenance.
Using new PP material, the car service car ramp has resilience, and the maximum load balancing is 7T.
This car ramp is recommended for normal height cars and will not work on low height cars "may hit the front bumper when you get it up".If you want to increase your car with low height to fill the hydraulic jack, you may buy the "Lower Car Ramp OLM-LCR13P" from the list below.
OLM-PCR15P "Current" | OLM-PCR14P | OLM-LCR13P | |
---|---|---|---|
Dimensions (1 piece) | 905mm x 305mm x 215mm | 905mm x 330mm x 215mm | 700mm x 200mm x 76mm |
Weight (1 piece) | 8.8 lbs (4 | 10.9 lbs (4.7 kg). | 3.5 lbs (1.6 kg). |
Load Capacity (2 pieces) | 7T | 7T | 3T |
Load Angle: | 17° | 17° | 8.6° |
Lift Height | 170mm | 170mm | 64mm |
W | 305mm | 330mm | 200mm |
Compatible Vehicles | Cars with regular height | Cars with regular height | Low height cars |
|
|
|
---|---|---|
1st StepAs close as possible to car tires and ramp cars |
Step 2Ensure the tire and ramp vehicle are parallel |
Step 3Give it slowly, and have a state! |