Feature

●This thermostat is specifically designed for hot and cold bathtubs, suitable for bathtubs and spa pools
●It can also be heated with cold water and is suitable for use at the bottom for its primary heating and retaining properties
●The water heater activates when the hot water is full, providing excellent performance
●No special maintenance or programming required, easy operation and convenient to use
●IPX5 waterproof rating widely used in pressure tub circulation systems


Description

Specifications:
Item Type: Water Heater Thermostat
Material: Stainless Steel
Model: H15-R1
Product Power: 1.5KW
Operating Voltage: AC220-240V
Waterproof Rating: IPX5
Current: 6.5A
Applicable Bathtub Water Volume: 9.8 gal (370 L)
Purpose: Constant Heating
Heater Type: Kettle
Applicable area: Massage tub, SPA bathtub
Weight: Approx. 54.7 oz (1,550 g).
Product Size: Approx. 30x13.5x5.5cm / 11.8x5.3x2.2in
Fitting Pipe Joint No.1 Size:
Thickness: Approx. 4mm / 0.16in
Height: Approx. 4.4cm / 1.7"
Outer diameter without thread: approx. 5.7cm / 2.2"
Fitting Pipe Joint No.2 Size:
Thickness: Approx. 3mm / 0.12in
Height: Approx. 4.4cm / 1.7"
Outer diameter without thread: approx. 5.7cm / 2.2"

Installation:
Tub water heater must be connected to the pipeline of the plumbing circulation system. You can also connect it to the inlet and outlet of the tub pump to ensure the direction of the water flow follow the directions of the bath water heater.
1. Heater needs to be set horizontally.
2. Heater can be attached to the inlet or exit of the tub pump. (Note: The binding cannot be modified)
3. PVC Pipe: Cut out certain length of polyethylene from the pump outlet and connect to the nozzle. (Note: The size of the pipe joint must be the same as the size of the bathtub)
4. Pipe Joint: Clean PVC pipe joints, use glue to connect PVC pipe and joints. (Note: Distance between heater and pump)

Package List:
1 x Water Heater Thermostat
1 x English Manual
2 x No.1 Fitting Pipe Joint
2 x No.2 Fitting Pipe Joint
2 x Joint Black Gasket