Function:
1 Easier to operate: The multiplexer is located on I2C address 0x70, which can be adjusted from 0x70 to 0x77. Simply write 1 byte to that port using the desired multiplication output number, future I2C data packets will be sent to this port.
2. Superior Control: You can use 8 of these multiplexers at 0x70‑0x77 addresses each to control 64 identical I2C addressing sections.
3 WIDE MATCHING: Compatible with 3V and 5V so it can be used at any logic level, very practical, reliable and efficient.
4 PRACTICAL USE: Connect up to 8 I2C devices with the same address to a microcontroller and route the I2C pin set of the command.
5 EASY TO INSTALL: Comes with 5 sets, each set has 2 pin headers that can be plugged into solderless breadboard.
How to use:
The multiplexer itself is on I2C address 0x70 (but can be adjusted from 0x70 to 0x77), and you can bam future I2C data by simply writing one byte, including the required multiplex output number. Packets are sent to this port. Theoretically, you can use 8 of these multiplexers at 0x70‑0x77 addresses each to control 64 identical I2C addressing sections.
Specifications:
Item Type: Development Board
Supply Voltage: 1.65V-5.5V
IIC address: 0x70-0x77
Frequency: 0-400kHz
Channel: 1-8 Channels
Reset: Turn on and reset.
Package List:
5 x Development Board a> 10 x Pin Headers