Features:
Choose the stamp size on the surface and choose the one you want.
The holes on the print nozzle are consistent size and machined, and the thread is clean and shaped.
Extruded brass prinhead is normally applied - prints non-abrasive material filaments like PLA, ABS, nylon etc.
Standard:
Material: Brass
Ski thread: M6
Nozzle Diameter: 0.3 mm
Input Diameter: 1.75 mm
Overall Dimension: 13x8 mm (L*D)
Package:
4 x Brass Nozzles
Note:
Keep small items out of reach of children.
After replacing the nozzle, re-adjust the distance between nozzle and build plate to ensure the quality of the printed version.
How to Replace Nozzle
1:Turn on the 3D printer, heat up the nozzle, block the target temperature. (PLA: 180-220, ABS: 240-280).
2:When heating is finished, close the printer, take the pan, and hold the heat blocks. Then use the socket slider screwdriver old nozzle extruder.
Note: Do not touch the old nozzle or heat block - avoid burns.
3:Hold the spanner key to secure the block,use the new slide dryer socket to tighten tightly.