Feature

●Advantage of brass materials: Brass heat conductivity is 7 times more than stainless steel. The MK10 hot-end construction allows the filament to be virtually untouched with the nozzle. In order to ensure the filament temperature is the same as the thermistor, the material of the nozzle must be brass, so the molten plastic is more smooth. However, stainless steel thermal conductivity is so poor and is unscientific and unreasonable with MK10 nozzles.
●Compatibility: Fits MK10 Hot End M7 Thread Aluminum Heater Block such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3
●Quantity and Specifications: M7 thread nozzle, diameter size 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm, 2 pieces of each size. Please refer to the diagram in the upper left for detailed dimensions.
●MULTI SIZE: There are 5 types of nozzle diameters commonly used. Experience different filament feeder speeds.


Description

Notification:

1. After replacing the nozzle, please re-adjust the distance between the nozzle and the build plate to ensure the quality of the printed parts.

2. Keep small parts out of reach of children.

Specification:

Compatibility: MK10 Hot End M7 Thread Aluminum Heater Block;

Output diameter: 0.008 inch (0.2 mm), 0.02 inch (0.4 mm), 0.02 inch (0.6 mm), 0.03 inch (0.8 mm), 0.04 inch
Input Diameter: 1.75mm;

Size:M7;

Material: Brass

Package Included:

Brass Nozzle: 10PCS(Diameter Size 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm, each size 2pcs)