Designed for crimping Anderson Power Pole 15/30 and 45 Amp connectors.Built-in contact positioner to hold contacts during crimping.Ratchet mechanism provides high strength, low resistance crimps every timeMuch faster and better than soldering.Provides high strength, low resistance connections
The contact points sit in the gap between the housing and the spring, and the contact point must be snapped at the end of the spring.
|
|
|
|
---|---|---|---|
Step1Select the right slot and place the pin in any of the three slots. |
step2Remove the wire and insert the wire into the connector. |
step3Close the tool a little until the ratchet fits right and then grab the connector. |
step4Well crimped and finished with fixed stitching. |