Feature
●Material: PET / PET Thickness: 50μm. It will be a sheet to be applied inside the window (inside the room). When placed on the outside, it will deteriorate due to UV rays in direct sunlight, so please do not use it outdoors
●This is a common surface window film for flat and flat float glass. Heat cracking may occur due to meshed glass or double layer glass (pair, double glass, etc.) so please do not use it. Please refrain from using the sheet glass as it is uneven and does not stick cleanly. We do not recommend using film for other special glass
●■ How to use: Water paste 1) Prepare the monotons: window film sheet cut to the size of the window for the paste, water: dish neutral detergent = 95:5 (in our store), please prepare a spatula (squeegee) and a towel. 2) Clean the oil and dirt on the window before pasting. Any dust or other debris may cause air bubbles. 3) Water: Spray a mist spray with a mild detergent for dish = 95:5 (in our store) over the glass surface. As water will drip off, please use vinyl or other areas where you dont want it to get wet, such as the window frame and use masking tape to nurture and protect it
●4) The window film is adhesive on the surface, so please peel off the protective transparent film from the adhesive. Once you have done peeling the adhesive side of the sheet with water: Spray a generous amount of misting spray with a mild dish soap = 95:5 (in our store). 5) Align the glass film to the window and paste it. There is a slight movement of water and fine adjustment. (It is recommended that you increase your hands depending on the size of your window, so that it does not slip off. If it is misaligned with the desired location, do not force it to continue. It is important to remove it once and then spray it again. 6) Once you have established the place, apply the surface of the film with water: dish neutral detergent = 95:5 (in our store) to prevent scratches, water and air bubbles encountered in between the window and film with a spatula (squeegee) to extrudge outward from the center and remove it. In this case, water will come out from the seat end, so please wipe it with a towel to prevent it from getting wet
●● This is a DIY product, so if you are concerned about the color, we have an A4 size that you can purchase from one sheet for a trial use. Please check this before making your purchase. Please clean the dust, dirt, and oil from the place you want to paste it before installation. If there is any leftover above, it may cause the product to be stuck properly. Please be aware of this. ● When the sticker is removed for a long time, there may be cases of glue residue left after sunburn, but our company will not be responsible for anything. Please acknowledge Our company will not be responsible for any damage or damage caused by damage (including constructions) during installation or after installation during installation or after installation during installation. Please acknowledge Please be aware that the color may fade due to UV rays found in direct sunlight, etc., and deterioration may be accelerated depending on the usage location and conditions
[A3 size-1 sheet 01-white 15 film]
Description
Material: PET / PET Thickness: 50μm. It will be a sheet to be applied on the inside of the window (inside the room). Do not use outdoors as the UV rays in direct sunlight will cause deterioration when applied on the outside it will become a general surface and flat float glass window film. Heat cracking may occur due to meshed glass or double layer glass (pair, double glass, etc.) so please do not use it. Please refrain from using the sheet glass as it is uneven and does not stick cleanly. We do not recommend using film for other special glass.