Feature
●UV Protection & Sun Adjustment: By experiments, this fill blocks over 84% UVA and 99% UVB rays, keeping the brightness of your room and softens glare from sun rays, protecting your familys health and preventing furniture from fading in color. It makes it easy for you to work on your computer during the day, reading or studying and reducing eye fatigue. Great for summer with strong sunlight and light in winter
●Energy Saving and Energy Saving: Cool in the summer and warm in the winter, creating a comfortable space within your living space. Blocks out heat from the outside (heat shielding effect) and keeps warm air from escaping (thermal insulation effect) By shielding the heat rays from the sun, reducing the flow of hot and cold air, the air conditioning efficiency is increased. In addition, you will get the effect of "winter insulation" that prevents warm air from escaping outside in winter
●No residue on glass, easy for beginners: The static electricity adhesive type can be applied with water without the use of glue, so you can remove it without leaving any residue or reposition it again and again. Even beginners can install it easily. Perfect for rental offices and renters. But please be careful. Uneven glass cannot generate static electricity, so please only use on smooth and flat glass
●(Blindfold/Room Decoration) It also maintains brightness while protecting privacy without compromising the open feeling of the glass window. You can enjoy coordinating it with your interior to match the atmosphere of your room
●(Wide Range of Applications) This window film is recommended for use in rooms such as windows of home, cupboards and bathroom windows, small kitchen windows, glass pouches, sliding glass doors, bathrooms, and also for businesses, stores, offices, conference rooms, French windows, and desk segments. (*Applies to smooth surfaces, do not stick on rough or uneven glass. )
[a 90*200cm]
Description
⚠
Product Features:
No adhesive is used on the sheets.
The suction cup effect makes it stick to the glass surface.
✎ Easy to apply and remove. No glue residue when removed.
(Adhesive Glass)
Smooth surface of transparent plate glass, frosted glass, uneven glass
How to remove the protective film:
💎 Comes with a protective film to protect the surface you are sticking. To remove, use the "peel off sticker" on the corner to remove it. When removing the unused parts, please apply cellophane tape to the protective film surface and replace it.
How to Use:
1. Measure the size of the glass surface to be applied and cut the sheet.
2. Clean the surface of the surface to be installed.
3. Before pasting, use a mist on the glass surface to gently wet it with water. If you put a mild detergent into a mist spray, it becomes easier to apply.
4. Check the position, and peel off the protective film and stick it to the edges. Please stick the side of the protective film to the glass.
5. Press the towel and paste the sheet in a way that air is pushed.
Precautions for Use:
1. Please attach items that are facing outside such as glass doors and windows from the inside.
2. Please avoid installation at room temperature and when the surface is below about 5 degrees Celsius and above 35 degrees Celsius.
3. Cannot be used on glass doors in bathrooms where water is directly exposed to water.
4. Do not use on car glass.
5. It is not shatterproof.
6. Please note that the protective film is not unnecessary.
When you use it again:
❶ Keep the protective film in place, peel it off from the window, then stick it on and store it to reuse.
When doing this, remove dust and other particles from the surface of the sheet with water, so as not to damage the surface.
【Shipping Service】
1. Since it is shipped overseas, there may be a variety of inspections such as customs and aircraft. Normally it takes 7-14 days to arrive. Thank you for your understanding.
❶If you have any problems, please feel free to contact us by email. After the product is delivered, please rest assured that if there is a mass issue, you can return it or exchange it.