[22: Dark Gray]

[07: White]

[05: Navy]

[02: Gray]

[10: Brown]

[01: Beige]

[28: Earth Green]

[06: Black]

How to use: 1. Measure your inseam and remove the folded part (inseam measurement + 2.8 - 3.1 inches (7 - 8 cm) and cut the excess excess off. Turn inside out with a light crease. 5. The white thread on each side of the tape is the adhesive surface. Make sure that this side is glued down. 2 Dry the iron and set the temperature to medium hair/scale. 3. Cut the tape about 2 cm longer than you need to glue it. 4 Press the tape to water and squeeze it lightly or spray it to seal the pants 6 Glue starts at the center of the inner crotch. Please press the iron so as not to pull the tape. 7