Feature

●A full fender that is extremely versatile and can be firmly fixed. With a wide variety of mounting vehicles, it can be used with disc brake frames, and has excellent fixation power
●ETRTO (406/451) for 20" Fender Width: 35mm / Compatible Tire Width: 20 x 1-1/8
●The fender body is made of polycarbonate which is the best impact resistant of plastic. Durable and UV resistant for long life
●Double staff fenders feature 2 long stays, so they can accommodate fender dowels that are not reachable to typical full fenders. Provides mounting versatility and high holding power
●Stainless steel parts are used for hanging hardware. It can also be mounted on caliper brake models cross bikes and road bikes. Hanging hardware bolts are included with 2 types (M6 x 60, M6 x 45). Works with both steel forks and aluminum forks
●Standard accessories: M6 bolts x 2, M5 bolts x 6, Stainless steel hanging hardware x 1, M6 spacers x 2, V-shaped stays x 4, Stake caps x 8, Washer nuts x 1, Stake lamp set
●Installation Notes: Please use pliers and bend the hanging hardware to fit the fender body and install it. Please cut the stay to the position of the dowel hole before using. Tire width varies by manufacturer. Make sure you have enough tire and fender clearance. ● Fender drilling is required when attaching to seat stavbridge. Does not sell repair parts only for bolts

[gloss black Fender width 45mm]




[gloss black Fender width 35mm]




[mirror silver Fender width 35mm]




[gloss black Fender width 65mm]




[black matte Fender width 45mm]




[gloss black Fender Width 55mm]




[gloss black Fender width 60mm]




[mirror silver Fender width 45mm]





Description

豊かなライフスタイルを提供する日本のスポーツバイクブランド。

とにかく汎用性が高くてガッチリ固定できるフルフェンダー。取り付け車種豊富、ディスクブレーキフレーム対応、ダブルステーで固定力抜群。
フェンダー本体はプラスチックの中で最高の耐衝撃性を持つポリカーボネートを採用。頑丈で紫外線にも強く長寿命。
ダブルステーフェンダーは長く伸びた2本のステーによって、一般的なフルフェンダーでは届かない位置にあるフェンダーダボにも対応。取り付けの汎用性と高い固定力を実現。
吊り金具にはステンレスパーツを使用。キャリパーブレーキモデルのクロスバイクやロードバイクにも取付可能。吊り金具用ボルトは2種類(M6×60·M6×45)付属。スチールフォーク、アルミフォークのどちらにも対応。
シルバーカラーは、アルミ膜を透明のポリカーボネート樹脂でサンドすることで金属の質感を100%再現しながら、軽さと耐久性も両立。サングラスにも使用される透明度の高いポリカーボネートの性質を生かした設計。

標準付属品:M6ボルト×2本、M5ボルト×6本、ステンレス吊り金具×1本、M6用スペーサー×2個、V型ステー×4本、ステーキャップ×8個、各ワッシャーナット、ステークランプセット

【取り付け時の注意】
吊り金具はプライヤーを使用して、フェンダー本体に合うように曲げて取り付けて下さい。
ステーはダボ穴の位置に合わせてカットしてご使用下さい。
タイヤの幅はメーカーによって異なります。タイヤとフェンダーのクリアランスが十分にあるかご確認下さい。
シートステーブリッジに取り付ける際は、フェンダーの穴あけ加工が必要です。
ボルトのみの補修パーツ販売はございません。
※FELTベルザスピード50への取り付け時は、長い方のステーが後輪下側に来るようにセットして下さい。
※BROAMへの取り付け時は、タイヤサイズを35C以下に変更し、別途でM5×70mmのボルトをご用意下さい。(このボルトの販売はございません。)