Feature

●The radiator and heating block are connected by hollow pipe, which greatly reduces heat overflow
●It can be installed in a variety of ways, allowing you to feed both long and short distances
●Lightweight and compact, lightweight to achieve faster movement, lower pressure on the motor, improve printing speed and stability
●High quality nozzle, not easy to oxidize and coarse the inner hole which leads to poor ejection defects


Description

Function:
1 Excellent heat dissipation, radiator reconstitution design, better heat dissipation performance
2. High quality nozzle, not easy to oxidation, coarse inner hole and less discharge
3 Lightweight and compact, lightweight to achieve faster movement, lower pressure on the motor, improve printing speed and stability.
4 The radiator and heating block are connected by hollow pipe, which greatly reduces heat overflow.
5 Various mounting options allow for both long and short range supplies.


How to use:
The U-shaped clip is secured between the top of the aluminum post and the buckle. The bottom of the unit is connected directly. Tighten the screws and add the nozzle. Installation is complete.

Specifications:

Item Type: 3D Printer Extruded Head
Material: Alloy
Nozzle Diameter: 0.008 - 0.02 inches (0.2 - 0.5 mm) (Standard) / 0.008 - 0.04 inches (0.2 - 1.0 mm) (High Flow Rate)
Product Heat Resistance: 122°F (500°C).
Function: Controls the amount of consumables extrusion in conjunction with the movement of the nozzle.
Applicable machines: Most of them were originally used V6 hot-end 3D printers, DIY printers, etc.




Package List:
1 x 3D Printer Extrusion Head
1 x Silicone Insulation Cover
3 x L-shaped wrenches
1 x Open Wrench
1 x U-shaped clamp
1 x Buckle
1 x Plastic box