48-84V 1000-1500W 15mosfets Sensor/Sensorless Brushless Motor Controller
Voltage: 48-84V
Low voltage cutoff: 40V + -1V
Rated Power: 1,000 - 1,500 W
MOSFET: 15pcs 100V MOSFET, due to the different production date of the controller, MOSFET brand is different, but we make sure the quality is good. If customer has MOSFET requests, please contact us before ordering!
Limit Current: 45A
Controller box dimensions: 8.5 x 3.3 x 1.8 inches (216 x 84 x 45 mm) (assemble the base of this size is not included)
This controller is a dual model that can work with both sensors and sensorless brushless motors. The limit current is 45A. Suitable for whichis 1000W, 1500W, brushless motors.
Function:
1. Low voltage, overcurrent protection
2. E-ABS / High / Low Level Brake
3. Regenerating brake (with switch on/off included)
4. Cruising Control
5. Backward/Reverse (Normally 40.5% of forward speed can make percentage as customer requirement)
6. 3 speed (We usually make 80%-100%-110% of the standard three speed when you do not use the switch, the speed is 100% to the use)
7. Cycle analyst (made in Canada CA V1 & V3, this display cannot connect a common 5-pin connector LCD display, which is a 6-pin connector! )
8. Anti-theft alarm (can be added, if customer does not have special requests, this function will not be added, please be careful)
Our controllers should be related with low voltage cut-offs, so this controller regeneration braking (brake EAB) only works well with 48V battery pack!
Packing:
1. A controller 48-84V 1500W 15mosfet dual mode
2.A wiring diagram
If buyers didnt have knowage to connect the controller, we dont recommend ordering it from us.
When you place the order, we do not accept any quality problems if you have any problems with the controller, please make sure that all items are connected due to problems caused by the opening of the controller, we do not provide any assurance.