Feature

●Product Contents: Wire lock x 1, Dedicated key x 3, Hex wrench x 1, CR2 lithium battery x 1, Instruction manual (English) x 1
●Size: Lock pin diameter: 0.5 inches (12.5 mm); Length: approx. 0.8 inches (21.7 mm); Wire part thickness: approx. 0.9 inches (24 mm); Total length: 43.3 inches (1100 mm); Weight: approx. 2.6 lbs (1.3 kg); *Please allow slight measurement errors
●Material: Stainless steel (lock body)
●(Details) Alarm power: CR2 lithium battery, Alarm volume: 120 dB, Alarm ON/OFF function


Description

Product description

Anti-theft effect
24mm diameter wire lock covered with braided translucent resin
You can see the wires that are bundled from translucent resin, so you can also aim at the security effect of vision.
The alarm unit is covered in stainless steel so it is difficult to break the alarm part.
By turning and locking it into a pole or a post, it can even be further added to the security effect.

Easy to lock
It can be locked by inserting the lock pin while the key is removed, so you dont have to worry about taking the key out when you lock it.
The alarm is turned on and off with a key.

Can be used freely.
It is covered with a sturdy thick resin, so there is no need to expose wires with a little scratch, and it can also prevent scratches to the car when putting on and taking off.
Even if you use it to prevent your helmet from getting scratched even if you use it as a bicycle frame to prevent theft.
It can also be used not only on bikes but also for bicycles and road bikes.

Loud Alarm
When you attempt to remove the wire lock or detect vibration, the 120 dB loud piercing alarm will sound and excels in preventing theft and mischief.

With ON/OFF function.
The alarm can be switched ON/OFF, so you can prevent the alarm from malfunctioning when you are carrying it.
When removed, the alarm can be stored with the OFF state.
Also, the alarm can be turned on or off with a key, so there is no need to worry about the third party to unalarm.

Waterproof
Of course, the lock part is waterproof. The wire is covered with a thick resin for excellent water resistance and can withstand outdoor use.

-Operation Method-
[On/Off Switch]
Insert a key into the key cylinder and turn the key on and off every time you lock it.

Alarm ON: When locked, the operating sound will sound "pitt"
(After a few seconds, you will hear a notification that indicates that the security alarm is turned on mode. )

Alarm OFF: When locked, the sound of the operating sound will sound "pippi" when you lock it.

When the security is activated, please unlock the lock and unlock it. Alarm stops when unlocked.

Legal Disclaimer

No warranty