Model Number:FR300RD
Coil Length: 37.4 inches (950 mm)
Dia.: φ11.8 inches (300 mm) inside of coil.
Weight: 120g
Function: Test AC leakage current, high current, harmonic current, complex waveform current, transient plunge current, phase, power, power, power factor, etc.
Test mode: Flexible CT: Output signal is current - time difference. By integrating the output voltage signal, the input current can be restored truely.
Coil diameter: 0.3 inch (8 mm)
Range: 0A ~ Device 10kA
Resolution: 0.1A
Output: 0.3mV / A 3mV / A 30mV / Third Gear (can be customized for 0-5V, 4-20mAh, etc.)
Power: 9V 6F22 battery (not included)
Low battery indication: Yes
Power consumption: It is expected to provide 80 hours of continuous power with 6 MA voltage output.
Accuracy level: ±1.0% FS (at 50Hz / 60Hz) is at the center of the coil at 23℃±2℃, under 70% RH, wire.
Phase error: ≤1° (50Hz/60Hz; 23℃±2℃)
Initial Phase: 90°
Output interface: BNC connector (optional audio plug, banana plug, bare wire)
Output line length: 6.6 ft (2 m)
Electric field interference: No, hysteresis effect, no external electrical field interference
Wire Position: Tested wire is at the center of the coil, positioning error will affect ±≤0.3%, FS
Frequency Response: 0.1Hz to 10MHz
Line Voltage: Tested under AC 1000V
Operating temperature and humidity: -4°F to 122°F (-20°C to 50°C), 80% RH or less
Storage temperature and humidity: -10°C to 60°C, 70% RH or less
Insulation strength: AC 2000 V / RMS (both ends of coil)
IEC1010-1, IEC1010-2-032, pollution level 2, CAT IV 1000V: Suitable for safety regulations
Random Attachment: Sensor: 1