[Stainless Steel SC645 |  50 Pieces]

[Iron |  Trivalent Chromate C1080 |  50 Pieces]

商品紹介

The tip of the main unit is expanded by hammering the core rod that is inserted into the main unit and it will adhere to the concrete hole wall.
No special tools required for installation.
The outer diameter of the body is the same as the nominal diameter of the screw, so it can be drilled with a thin drill compared to other anchors. It can also be installed over the mount so that there is no problem of misalignment.
Perforation depth to concrete should be above the prescribed value, so it is easy to manage the depth of the holes.
By pushing the lead rod into contact with the top of the main unit, you can check the installation completion, making it easy to manage.

ご注意（免責）＞必ずお読みください

Precautions regarding installation
Install and install the nut with washer. If the nut with washer is installed and knocked into it, there is a risk that the installation is defective.
In addition to the thickness of finishing materials such as fixtures and mortar, please ensure the depth of the hole and depth of the size chart. Shallow embedded depths will significantly reduce strength

From the Manufacturer

Sunrise Ind High Anchor C Type

The tip of the main unit is expanded by hammering the core rod inserted into the body and it will adhere to the concrete hole wall.

Applications: Fixing benches and handrails, electrical work, air conditioning work, plumbing work, etc.

Features:

No special tools required for installation.

The outer diameter of the body is the same as the nominal diameter of the screw, so it can be drilled with a thin drill compared to other expansion type anchors.It can be installed over the top of the mount so there is no problem of misalignment.

Perforation depth for concrete should be above the specified value, so it is easy to manage the depth of the holes.

By pushing the core rod into the top of the main unit, you can check the completion of the installation process, making it easy to manage.

Images are for illustrative purposes only.

(more)

Installation Method

Drilling: Drill from the top of the mount to the desired depth (depending on marking, etc.) Cleaning: Use a blower to remove the particles in the holes.	Insert: Insert the nut and washer of the anchor until it touches the fixture. Access: Hammered until the head of the lead rod touches the top of the anchor body.	Finished: Tighten the nut with a spanner or other similar product.

(more)