Feature

●Easy to operate and secure installation just by pushing the pins. In addition, just look at the pin to ensure that the hitting is complete
●The screw diameter and anchor body have the same diameter, so you can drill it over your instrument and install an anchor without rattling
●Suitable for installing all kinds of equipment such as construction work, electrical work, hygiene, heating and cooling work, sign mounting, chair mounting, machine installation work, etc


Description

Manufacturer: Unica
Model Number: C-1612_set
Product Name: Rutie Anchor
JCAA certified product.
C type, M screw (steel)
Core rod insertion type.
Screw Diameter (Outer Diameter): M16
Total Length: 4.7 inches (120 mm)
Thread length: 1.6 inches (40 mm)
Maximum thickness: 1.5 inches (38 mm)
Nut Double-sided Width: 0.9 inches (24 mm)
Drilling conditions: Pre hole diameter 0.7 inches (17.0 mm) / Pre hole depth 2.8 inches (70 mm) or more.
Embedded Depth: 2.4 inches (60 mm)
Maximum pulling strength (kN): 41.0
Surface treatment: trivalent chromate treatment
Quantity: 15
Compatible Materials:
Suitable for: Concrete
Suitable for: stone

Installation Method:
(1) Drill the hole diameter and depth from the top of the instrument.
(2) Remove dust with a dust collector or blower
(3) Set the anchor and hammer the other with pins.
(4) Tighten the nut with a spanner if necessary and complete the installation.

[Note]
The maximum pulling strength is measured by Unica, and is not the standard value.
When installing, be sure to wear protective gear such as safety glasses, helmets, etc.
Please drill it in a way that is right angle to the target surface.
Please drill deeper than the embedded depth of the anchor, M6, M8, M10 +5 mm, M12 = +7 mm, M16, M20 = 0.4 inches (10 mm).
If the bottom hole is too shallow it may cause the lead rod to breakage or warping.
Please thoroughly remove the dust cutting.
Please make sure to set the nut before stamping.
Please use the hammer according to the anchor size.