Feature

●Related items for hardware and construction materials, fastening tools, metal anchors
●Manufacturer name: Tlasco Nakayama Co., Ltd. / [Features] / Screw anchor for asphalt. / ·Easily removable screw down anchor. [Uses] / For guide posts for parking lots, etc. / Cycle Stand Specifications: Product Name: TRUSCO Asphalt Screw Anchor, 10 x 70 (SUS410) 4 pieces; Model Number: AS-1070; Screw Nominal: M10; Total Length: 3.0 inches (77 mm); Screw Length: 2.4 inches (60 mm); Drill Diameter: 0.3 inches (77 mm); Maximum Tensile Load (kN): Approx. 5.8 mm); Outer Diameter: Approx. 2 inches (5.8 mm). Width Measurement: 0.4 inches (10 mm) Embedded Depth: 2.8 inches (70 mm) / Bottom Hole Diameter: 0.39 inches (7 mm) / Thread Diameter: 0.49 inches (10 mm) / Head Height: 0.39 inches (15 mm) / Nominal Dimensions L: 2.8 inches (70 mm) / Maximum Tensile Load: Approx. 2.0 inches (590 mm) / Head Diameter (15 mm)
●: 15 / Head Height: 0.3 inches (7 mm) / Screw Diameter: 0.4 inches (10 mm) / Material: Finish: Stainless Steel (SUS410) / Surface Treatment: Geometetting Processing: Weight: 3.5 oz (103 g) / JAN Code: 4550414010844 / [Caution] / ● Asphalt material, thickness, temperature, humidity, and strength may vary depending on the environment used. Do not use a hammer drill when tightening. /


Description

Manufacturer Name: Trusco Nakayama Co., Ltd.
[Features]
Screw anchor for asphalt.
Easily removable screw down anchor.
[Uses]
Use as guide posts for parking lots.
Cycle stand
Specifications:
Product Name: TRUSCO Asphalt Screw Anchor, 10 x 70 (SUS410), 4 Pieces
Product Number: AS-1070.
Thread Nominal: M10
Total Length: 3.0 inches (77 mm)
Screw length: 2.4 inches (60 mm)
Drill diameter: 0.3 inches (7 mm)
Maximum Tensile Load (kN): Approximately 5.8
Outer Diameter: 0.4 inches (10 mm)
Body Length: 3.0 inches (77 mm)
Length: 3.0 inches (77 mm)
Width of faces: 0.4 in (10 mm)
Embedded Depth: 2.8 inches (70 mm)
Hole Diameter: 0.3 inches (7 mm)
Screw diameter: 0.4 inches (10 mm)
Head diameter: 0.6 inches (15 mm)
Head Height: 0.3 inches (7 mm)
Brim Diameter: 0.6 inches (15 mm)
Nominal Dimensions: L: 2.8 inches (70 mm).
Maximum tensile load: Approx. 5.8 kN (approx. 590 kgf)
Drive Depth: 2.0 inches (50 mm)
Nominal Dimensions: L: 2.8 inches (70 mm).
Brim Diameter: 0.6 inches (15 mm)
Head diameter: 0.6 inches (15 mm)
Head Height: 0.3 inches (7 mm)
Screw diameter: 0.4 inches (10 mm)
[Material/Finish]
Stainless Steel (SUS410) / Surface Treatment: Geometted
Weight: 3.6 oz (103 g)
JAN Code: 4550414010844
[Caution]
● Strength may vary depending on the asphalt material, thickness, temperature, humidity, and usage environment, so please use it carefully before use. Do not use a hammer drill when tightening.