[O-Orange PETG 1KG]
[F-Pure Orange PETG 1KG]
[H-Pure Yellow PETG 1KG]
[Q-Green PETG 1KG]
[B-Solid White PETG 1KG]
[D-Pure Silver PETG 1KG]
[L-Natural PETG 1KG]
[N-Light Red PETG 1KG]
[R-Blue PETG 1KG]
[A-Solid Black PETG 1KG]
[M-Crimson PETG 1KG]
[C-Pure Grey PETG 1KG]
eSUN PETG 3D Printer Filament, PETG Filament 1.75 mm, Dimensional Accuracy / - 0.05 mm, 3D Printing Filament, 2.2 lbs (1 kg) Spool PETG Modeling Material for 3D Printers
【PETG】
Material: PETG
Weight: 2.2 lbs (1 kg).
Diameter: 0.06 inch (1.75 mm) (Dimensional Accuracy +/- 0.05 mm)
Length: 350-355m
【PETG printing parameters】
Printing Temperature: 558 - 666°F (250 - 270°C)
● Bed Temperature: 156°F - 198°F (75°C - 90°C)
Density: 0.05 oz (1.27 g) / cm³
Melt index: 20 (250 °C/2.16 kg) g/10 min
Tensile strength: 52.2 MPa
Breaking point elongation: 83%
● Bending Strength: 58.1 Mpa
Bending elasticity ratio: 1073Mpa
Izod Impact Strength: 4.7 KJ/m³
Heat deformation temperature: 144 °F (64 °C), 0.45 Mpa)
【PETG printing features】
● High purity, low impurities, no nozzle jam and printing success rate is very high.
● Minimum tolerance to ensure consistently protruded, clogged, and extremely high success rate.
● Strong toughness for smooth 3D printing, no clogging printing head.
● Non-toxic, low smell, best material for indoor printing, environmental friendly.
● 3D printer filament is vacuum sealed with desiccant
● Widely used and high compatibility, suitable for most FDM 3D printers.
Brand Introduction:
eSUN was founded in 2002, specializing in the R&D and industrial of biodegradable polymers We coordinate open innovation with several top universities and institutions. We own three R&D centers that research and develop polymer synthesis, modification, and application of each polymer.
[Precautions before purchasing]
We have done our best to make our product colors as accurate as possible, but depending on your viewing environment, there may be some differences in the actual product. Thank you for your understanding.