Product Description:
The module is divided into input and output. (White), Red and Green line are input ends. (White), Red and Green are Negative. Two high voltage lines with the same color are the input end. Proper arc distance is fixed to the output end. The input terminal is connected. Batteries can generate high voltage and high temperature arcs.
Note:
1. High voltage module must be protected from high voltage and no load power. The high voltage line end must be adjusted before power-on. The arc distance of the high voltage line is proportional to the battery voltage and capacity used.
2. When testing arc distance, it should be tested for long and short. It is prohibited to exceed the longest arc discharge distance when the power is turned on. The module is prone to damage as it does not release high voltage energy.
3. The internal heat is not appropriate, as the power of the module is increased, it is not permitted for long time work.
4. To determine if the battery capacity can run the maximum output power is by measuring the battery voltage when the arc discharged. If you are centered on a 6V, it can output maximum power.
5. Small capacity lithium battery connected in series by 7.2V Voltage measured in arc sampling state has reduced to about 4V. Small capacity, low voltage pull. Therefore, it is recommended to use more than 2000MA lithium batteries, and it is better to have a battery of 4000MA or more.