Feature

●Features: Filament absorbs light and glows in the dark
●【Wide Compatibility】HELLO 3D Glow in the Dark PLA Filament 1.75mm (Dimensional Accuracy +/- 0.05mm) can be used with all DIY 3D printers
●Glow in the dark: It is translucent before it is luminous. It absorbs LEDs, fluorescent bulbs, incandescent bulbs and all light, but is especially ideal for providing a stronger glow
●Environmentally friendly: PLA (polylactic acid) is a plant derived material. Odorless, warp, no bubbles, recommended for beginners with 3D printers
●Vacuum sealed package: The evenly rolled filaments are vacuum sealed with desiccant. Prevents moisture degradation

[bule]



[green]




Description

HELLO PLA Filament for 3D Printers
0.07 inches (1.75 mm), 2.2 lbs (1 kg), Filament Diameter / Accuracy: 0.06 inches (1.75 mm) / ± 0.05 mm
Recommended nozzle temperature: 394 - 488°F (190 - 220°C).
Recommended printing speed: 2.0 - 4.3 inches (50 - 110 mm/s
Hot bed: Not necessary, but can be used (up to 50℃)
Filament Weight: 2.2 lbs (1



For use until the very last
1. Remove the filament if you do not use the printer for more than a few days.
2. Store it in a dry bag or box to prevent the filament from deterioration.



[Precautions]
Print must be a little thicker to ensure enough light to absorb. Small or small items may not light too much.
Sunlight, black light, and more UV light source, the better it shines.
Brightness in the dark is green