Manufacturer: Unica
Model Number: SE-16
Product Name: Resin A
JCAA certified product.
Adhesive anchor (capsule type).
SE type
Rotating/striking type
Outer Diameter x Total Length: 0.6 x 4.7 inches (16.8 x 120 mm)
Volume: 0.7 fl oz (21.0 ml)
Bolt Heterogeneous Rebar: M16, W5/8, D16
Standard Drilling Conditions:
M16, W5/8: Pre hole diameter 18.0/Pre depth 130
D16: Pre hole diameter 20.0 / Pre hole depth 130
Maximum pulling strength (kN):
M16, W5/8: 107.6
·D16: 97.9
Quantity: 10
Compatible Materials: Concrete, masonry
Installation Method:
(1) Perforated right angle to the target surface with a certain bottom hole diameter and hole depth.
(2) Clean the particles in the hole with a dust collector or blower.
(3) Use the brush to remove the particles that are adhered to the hole, then reclean the inside with a dust collector or blower.
(4) Insert the capsules.
(5) Attach the bolt to the motor motor and allow it to be rotated and striked, and embedded into the bottom of the hole.
(6) Do not move the anchor bolt within a certain hardening time after embedding