Instructions for use
1. Bottom board must be level
2. Heat the hot bed to 80-100℃, apply transparent gold polyimide high temperature resistant tape to the surface, keep the tape surface clean.
3. The lower fill rate when printing the item can solve the ABS shrink crack 5%-10%.
4. We recommend that the thickness of the layer is not smaller than the diameter of the nozzle. You can also test parameters such as 0.2, 0.25, and 0.3.
5. It is better to turn off the cooling fan.
6. Adding baffles around the printer to maintain a constant temperature effect in the printing environment.
Specifications:
Printing Temperature: 412 - 484°F (200 - 240°C).
Bottom plate temperature: 244°F (110°C).
Density: 1.05g/cm
Melting index: 60 (220°C / 10kg) g / 10min
Tensile Strength: 45Mpa
Stretch at break: 30%
Bending Strength: 58 Mpa
Bending Elasticity: 2400 Mpa
Lzod Notched Impact Strength: 48 KJ /m²
Load deflection temperature: 185°F (85°C), 0.45 MPa)