Feature

●Nylon with Carbon Fiber: PA12-CF uses nylon 12 as a base material, and is reinforced with 15% carbon fiber, which greatly improves the performance of the entire material, and further reduces the risk of warping during printing, creating a non-thermal environment
●Excellent overall performance: Choose PA 12 long chain nylon with low density, low hygroscopic, high toughness, high abrasion resistance, excellent chemical resistance, and high heat resistance. Good dimensional stability, no warping or shrinkage during printing
●Low Moisture Sensitivity: Low Density: The saturated moisture absorption rate of PA12 long chain nylon is 1/10 of a regular PA6, and it completely solves the disadvantage of the mechanical properties and dimensional stability of nylon materials that change significantly before and after moisture. Absorption PA12-CF is one of the most dense FDM industrial printing materials, making it easy to achieve high-strength, lightweight industrial applications
●Wide range of uses: Compared to traditional nylon filaments, it has high strength, rigidity, and has excellent abrasion resistance. Durable and flexible for industrial components, prosthetics, medical equipment, complex costumes, etc
●【Vacuum Sealed Packaging】PA12-CF is packed in aluminum foil bag, which is more water resistant than clear nylon bags, and is completely moisture-proof. Aluminum foil bags have a built-in seal strip that can be reused after breaking the heat seal to help the material dry longer


Description

Function Description
The manufacturing process controls the dispersion and distribution of reinforced fibers within the material matrix, so the reinforced fibers form a network skeletal structure within the material, and withstand the majority of the load communicated by the material matrix. Intelligent fiber reinforcement technology greatly improves the mechanical properties and heat resistance of the material, reinforced fiber network structure releases internal stress during the printing process, higher dimensional stability of the printing components, no warping problem.

Specifications:
Nozzle Temperature: 280-300°C
Recommended Nozzle Size: 0.02 - 0.04 inches (0.4 - 1.
Bottom plate temperature: 104 - 154°F (40 - 70°C).
Raft Pitch: 0.08-0.12mm
Cooling Fan:Off
Printing Speed: 1.2 - 4.7 inches (30 - 120 mm) / s

Special Requirements:
The nozzle temperature of the device may reach 280°C-300°C
Use advanced nozzle (stainless steel life is about 50 hours, hardened steel life is 200-300 hours)
It is recommended to use a PEI bottom plate or apply a PVP stick glue