Feature
●(Sparkling Aesthetics) The PLAK5Sparkle filament was developed based on PLAK5 / PLAK5T and has been added with ultra-fine pigments including precious metals. PLA K5Sparkle distributes sparkles more evenly over the filament compared to regular metallic pigments added, which greatly improves brightness and durability
●Stable performance and ease of printing: The same printing experience as normal PLA without sacrificing printing performance for special effects. Easy to use without having to adjust the parameters repeatedly during printing. Excellent surface finish for direct decoration and better sunlight results
●【High Consistency and Dimensional Accuracy】PLAK5 uses optimized extrusion process and dual fault detection technology, which greatly reduces printing failures caused by mismatches in the diameter of the filament. Tolerance of PLAK5 Sparkle Filament is strictly controlled to +/- 0.03mm
●【Strict Quality Control】With enhanced impact strength and high fluidity, you can print a wider temperature and speed range and keep the surface smooth without warping deformation. Accurate deposits of each layer provide good surface quality. It melts well and provides a smooth and constant supply without clogging the nozzle
●【Packaging & Aftersales】The net weight of each filament is 2.2 pounds per spool. Vacuum bags sealed with desiccant prevent dust and keep the filament dry. For a better printing experience, we will provide after-sales service, and email will be reply as soon as 24 hours
[black 1.75mm]
[green 1.75mm]
[red 1.75mm]
[blue 1.75mm]
[blue (DARK BLUE) 1.75mm]
Description
Function Introduction:
Stable performance and easy printing: Same printing experience as normal PLA without sacrificing special effects printing performance. Easy to use without having to adjust the parameters repeatedly during printing. Excellent surface finish, can be used directly to decorate and improve effect in the sun
BRILLIANT AESTHETICY: The PLAK5 Sparkle Filament was developed based on PLAK5 / PLAK5T with extra fine pigments including precious metals. PLA K5 is a more even flash distribution on the filament compared to the addition of ordinary metal pigments, which greatly improves brightness and durability.
Specifications:
Weight: 2.2 lbs (1
Wire diameter: 0.07 inches (1.75 mm)
Accuracy: ±0.03mm
Printing Temperature: 200-220°C
Platform Temperature: 88-140°F (30-60°C).
Printing Speed: 1.6 - 3.1 inches (40 - 80 mm) / s
Recommended Applications:
Recommended for use with some architectural models, home bathrooms, landscape layout, sculptures, etc.