Feature

●UltraPA-GF is specially developed for FDM3D printing process. The material is high temperature nylon, with low moisture absorption, high strength, high abrasion resistance, and high temperature resistance. Good dimensional stability, no warping or shrinkage during printing
●Intelligent Fiber Strengthening Technology: Through the manufacturing process, the dispersion and distribution of the reinforcement fibers within the material matrix, ensuring that the reinforced fibers form a network skeleton structure within the material, and withstand the majority of the load transmitted by the material matrix. Significantly improves the mechanical properties of the material
●ULTRA LOW MOISTURE SENSITIVITY: UltraPA-GF substrate uses high temperature nylon, the saturated moisture absorption rate is 1/10 of the normal PA6, completely solve the disadvantage of the significant changes in the mechanical properties and dimensional stability of nylon. Material wicks moisture
●Ultra Abrasion Resistant: UltraPA-GF has low coefficient of friction, self-lubricating and abrasion resistance. Easily implements all kinds of high strength gears and industrial applications that require abrasion resistance
●Special requirements: nozzle temperature of 300°C; use stainless steel nozzle or hardened steel nozzle. Base plate material must be coated with PVP adhesive


Description

Function Introduction:
UltraPA-GF is specially developed for the FDM 3D printing process and uses high temperature nylon with 15% fiberglass filling. It has the characteristics of low moisture absorption, high strength, high abrasion resistance, good chemical resistance, and high heat resistance. Good dimensional stability, no warping or shrinkage during printing

Specifications:
Wire diameter: 0.07 inches (1.75 mm)
Accuracy: ±0.03mm
Net Weight: 2.2 lbs (1
Nozzle Temperature: 666 - 886°F (280 - 320°C).
Platform Temperature: 154-176°F (70-80°C).
Printing Speed: 1.2 - 4.7 inches (30 - 120 mm) / s

*Special Requirements:
The nozzle temperature of the device will rise to 300 degrees Celsius
Nozzle material uses more than steel nozzles (stainless steel life is about 50 hours, hardened steel life is 200-300 hours).
Bottom plate material needs to be coated with PVP adhesive