[M4-12 2 pieces]
[M1-8 1 piece]
[M3-M12 2 pieces]
[M3-M12 1 piece]
[M1-10 2 pieces]
[M1-8 2 pieces]
[M1-12 2 pieces]
[M1-12 1 piece]
Specifications:
Product Name: Tap Handle
Material: Zinc Alloy/Carbon Steel
Usage range: M3-M12
Package includes: 1 pcs
Product Description:
1. Carbon steel handle, zinc alloy chuck with electrostatic spraying, provides high hardness and abrasion resistance for high service life.
2. Straight handle design provides more force, especially when using large diameter taps.
3. Adjustable metal tap reamer wrench is used to hold large taps in an open space where there is room to turn the tap wrench.
4. It can improve the efficiency of the processing thread, which is necessary tool for hand tapping work.
5. Ideal for hand threading and tapping in machining.
How to use:
1. Check the clamp range of the die cutter and the specifications and outer diameter of the die to cut to ensure the two match.
2. Select the appropriate screwdriver to loosen the fixing screw on the die aperture clamp body.
3. Put the die into the clamp body of the die twister and turn the die slightly to match the position of the die edge hole and twister fixing screw.
4. Tighten the screws with a suitable screwdriver to make sure the die and squeezer are joined tightly.
Note:
Please allow 1-2mm error due to manual measurement. Please make sure you do not mind before you place an order.